AZ2250 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – 30 AMP MINIATURE POWER RELAY

AZ2250
30 AMP MINIATURE
POWER RELAY
FEATURES
• 1 Form A, B and C contacts available
• AC and DC coils available
• High dielectric strength version available
• Epoxy sealed versions available
• UL Class F (155°C) standard
• UL, CUR file E44211
• VDE certificate 40027037
CONTACTS
Arrangement SPST (1 Form A)
SPST (1 Form B)
SPDT (1 Form C)
Ratings
Resistive load:
1 Form A
Max. switched power: 840 W or 8310 VA
Max. switched current: 30 A
Max. switched voltage: 28 VDC or 277 VAC
1 Form B
Max. switched power: 280 W or 4155VA
Max. switched current: 15 A
Max. switched voltage: 28 VDC or 277 VAC
1 Form C
Material
Resistance
Max. switched power:
Max. switched current:
Max. switched voltage:
560 W or 8310 VA (N.O.)
280 W or 5540 VA (N.C.)
30 A (N.O.)
20 A (N.C.)
28 VDC or 277 VAC
Silver cadmium oxide [1], silver tin oxide [2]
< 50 milliohm initially
(24 V, 1A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
500 mW, DC coil
1.4 VA, AC coil
1.7 W at 20°C (68°F) ambient, DC coil
2.7 VA at 20°C (68°F) ambient, AC coil
43°C (77°F) at nominal coil voltage
Max. Temperature
155°C (311°F)
NOTES
1. All values at 20°C (68°F)
2. Relay may pull in with less than “Must Operate” value.
3. AC coils are not VDE approved
4. 18 VDC coil is not VDE approved.
5. Specification subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time
Release Time
Dielectric Strength
(at sea level for 1 min.)
Insulation Resistance
Dropout
Ambient Temperature
Operating
Vibration
Shock
Enclosure
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
Packing unit in pcs
Minimum operations
1 x 10⁷
1 x 10⁵ at 30 A 250 VAC
15 ms max. at nominal coil voltage
10 ms max. at nominal coil voltage
(with no coil suppression)
2500 Vrms coil to contact
4000 Vrms coil to contact (version “T”)
1500 Vrms between open contacts
1000 megaohms min. at 20°C,
500 VDC 50% RH
DC: > 10% of nominal coil voltage
AC: > 20% of nominal coil voltage
-40°C (-40°F) to 85°C (185°F), DC coils
-40°C (-40°F) to 70°C (158°F), AC coils
1.5 mm DA at 10-55 Hz
10 g
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
36 grams
40 per plastic tray / 280 per carton
ZETTLER electronics GmbH - A ZETTLER GROUP Company
Junkersstr. 3, D-82178 Puchheim, Germany
phone: [phone] [e-mail]
fax: [phone]
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
www.ZETTLERelectronics.com
2014-09-08