AZ2150_14 Datasheet, PDF (1/2 Pages) ZETTLER Electronics – MINIATURE POWER RELAY

AZ2150
MINIATURE
POWER RELAY
FEATURES
• 30 Amp switching capability for both N.O. and
N.C. contacts
• 1 Form A, B and C contacts available
• Life expectancy to 10 million operations
• Class B insulation standard
• Class F (155°C) version available
• Available with an epoxy seal for automatic wave
soldering and immersion cleaning
• Proof Tracking Index (PTI/CTI) 175
• UL, CUR file E44211 including versions meeting
UL 508 and UL 873 spacing and contact rating
requirements;
• VDE certificate 40023154 (AZ2150-1A and 1C only)
CONTACTS
Arrangement SPDT (1 Form C),
SPST (1 Form A and 1 Form B)
Ratings
Resistive load:
Max. switched power: 900 W or 7200 VA
Max. switched current: 30 A
Max. switched voltage: 30 VDC* or 300 VAC
Rated Load
UL, CUR
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
See chart for UL contact ratings on page 2.
AZ2150 series meets UL 508 group A spacing
and UL 873 refrigeration and safety control
requirements. AZ2151 series meets UL 508
group B spasing requirements.
VDE
Class F coil wire version - 1 Form A
25 A at 250 VAC, resistive, 10k cycles
Class B coil wire version - 1 Form A
20 A at 250 VAC, resistive, 10k cycles
Material
Resistance
Class B & F coil wire version - 1 Form C
N.O.: 20 A at 250 VAC, resistive, 10k cycles
N.C.: 10 A at 250 VAC, resistive, 10k cycles
Silver cadmium oxide
< 20 milliohms initially
(at rated current, voltage drop method)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Unsealed relays should not be dip cleaned.
4. Other coil resistances and sensitivities available upon request.
Please call the factory.
5. Specifications subject to change without notice.
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10⁷
1 x 10⁵ at 30 A 120 VAC Res. (N.O.)
Operate Time
Max. 12 ms
Typical: 8 ms
Release Time
Max. 5 ms
Typical: 3.5 ms
Dielectric Strength
2500 Vrms coil to contact
(at sea level for 1 min.) 1500 Vrms between open contacts
Insulation Resistance 1000 megohms min. at 500 VDC, 20°C
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Vibration
At nominal coil voltage
-55°C (-67°F) to 85°C (185°F)
0.062" (1.5 mm) DA at 10–55 Hz
Shock
20 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight
25 grams
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
500 mW
2.2 W at 20°C (68°F) ambient
1.8 W at 40°C (104°F) ambient
43°C (77°F) at nominal coil voltage
Temperature
Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
ZETTLER electronics GmbH - A ZETTLER GROUP Company
Junkersstr. 3, D-82178 Puchheim, Germany
phone: [phone] [e-mail]
fax: [phone]
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
www.ZETTLERelectronics.com
2014-07-03