AZ2150W Datasheet, PDF (1/3 Pages) ZETTLER Electronics – 30 AMP MINIATURE POWER RELAY

AZ2150W
30 AMP MINIATURE
POWER RELAY
FEATURES
• 1.75 mm contact gap
• DC coils up to 48V
• High dielectric strength 4 kV contact to coil
• All plastics PTI 250
• Epoxy sealed versions available
• UL Class F (155°C) standard
• UL, CUR file E44211
• VDE certificate 40023154
RoHS compliant !
CONTACTS
Arrangement SPST (1 Form A)
Ratings
Resistive load:
Max. switched power: 900 W or 8310 VA
Max. switched current: 30 A
Max. switched voltage: 250 VDC* or 440 VAC
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Operate Time
Release Time
Ratings
UL, CUR
VDE
Material
Resistance
*Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
30 A at 277 VAC, General use
20 A at 250 VAC, AC7a
Silver tin oxide
< 50 milliohm initially
(24 V, 1A voltage drop method)
COIL
Power
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Temperature Rise
Max. Temperature
625 mW
1.7 W at 20°C (68°F) ambient
43°C (77°F) at nominal coil voltage
155°C (311°F) Class F
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
4. If higher electrical loads are to be switched by the relay contacts,
the vent nib has to be opened prior to use of the relay.
Dielectric Strength
(at sea level for 1 min.)
Insulation Resistance
Insulation
(according to
DIN VDE 0110,
IEC 60664-1)
Holding Voltage
Dropout
Ambient Temperature
Operating
Vibration
Shock
Enclosure
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
Packing unit in pcs
Minimum operations
2 x 10⁵
3 x 10⁴ at 30 A 250 VAC Res.
15 ms max. at nominal coil voltage
10 ms max. at nominal coil voltage
(with no coil suppression)
3000 Vrms between open contacts
4000 Vrms contact to coil
1000 megaohms min. at 20°C,
500 VDC 50% RH
C250
Overvoltage category: III
Pollution degree: 2
Nominal voltage: 250 VAC
Greater than 50% of nominal coil voltage
Greater than 10% of nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
1.5 mm DA at 10-55 Hz
10 g
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
80°C (176°F)
30 seconds
25 grams
40 per plastic tray / 280 per carton
ZETTLER electronics GmbH - A ZETTLER GROUP Company
Junkersstr. 3, D-82178 Puchheim, Germany
phone: [phone] [e-mail]
fax: [phone]
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
www.ZETTLERelectronics.com
2015-03-31