ZSM300 Datasheet, PDF (1/5 Pages) Zetex Semiconductors – SUPPLY VOLTAGE MONITOR

SUPPLY VOLTAGE
MONITOR
ISSUE 1 – NOVEMBER 1995
DEVICE DESCRIPTION
The ZSM300 is a three terminal under
voltage monitor circuit for use in
microprocessor systems. The threshold
voltage of the device has been set to 2.63
volts making it ideal for 3 volt circuits.
Included in the device is a precise voltage
reference and a comparator with built in
hysteresis to prevent erratic operation. The
ZSM300 features an open collector output
capable of sinking at least l0mA which only
requires a single external resistor to
interface to following circuits.
Operation of the device is guaranteed from
one volt upwards, from this level to the
device threshold voltage the output is held
low providing a power on reset function.
Should the supply voltage, once established,
at any time drop below the threshold level
then the output again will pull low.
The device is available in a TO92 package for
through hole applications as well as SO8 and
SOT223 for surface mount requirements.
SCHEMATIC DIAGRAM
ZSM300
FEATURES
• ^{SO8, SOT223 and TO92 packages}
• ^{Power on reset generator}
• ^{Automatic reset generation}
• ^{Low standby current}
• ^{Guaranteed operation from 1 volt}
• ^{Wide supply voltage range}
• ^{Internal clamp diode to discharge}
delay capacitor
• ^{2.63 volt threshold for 3 volt logic}
• ^{20mV hysteresis prevents erratic operation}
APPLICATIONS
• ^{Microprocessor systems}
• ^Computers
• ^{Computer peripherals}
• ^{Instrumentation}
• ^Automotive
• ^{Battery powered equipment}
4-339