DN86 Datasheet, PDF (1/8 Pages) Zetex Semiconductors – Reduced component count and compact reference design for MR16 replacement lamps using multiple 1W LEDs

DN86
Reduced component count and compact reference
design for MR16 replacement lamps using multiple
1W LEDs
Silvestro Russo, October 2007
Introduction
MR16 lamps are one variety of Multifaceted Reflector (MR) lamps that usually employ a halogen
filament capsule as the light source. They are used in many retail and consumer lighting
applications where their size, configurability, spot-lighting capability and aesthetics provide utility
and creativity. Low efficiency, heat generation and halogen capsule handling issues are among
the disadvantages of the technology. They typically operate from 12V DC or 12V AC, using
conventional electromagnetic transformers.
LEDs offer a more energy efficient and no radiated heat solution to replace some halogen lamp
applications.
This reference design is intended to fit into the base connector space of an MR16 style LED lamp.
The design has been optimized for part count and thermal performance. The design can be used
with up to 3 1W LEDs in the Lens section. This can be arranged to suit the luminary designer's
requirements.
Figure 1 MR16 application with ZXLD1350
Data sheet
It is recommended that this design note is used with the data sheet for the ZXLD1350 see
http://www.zetex.com/3.0/pdf/ZXLD1350.pdf
Issue 1 - October 2007
1
© Zetex Semiconductors plc 2007
www.zetex.com