BSP75G Datasheet, PDF (1/8 Pages) Zetex Semiconductors – 60V self-protected low-side IntelliFETTM MOSFET switch

BSP75G
60V self-protected low-side IntelliFET^TM MOSFET switch
Summary
Continuous drain source voltage
On-state resistance
Nominal load current
Clamping energy
V_DS=60V
550m⍀
1.4A (V_IN = 5V)
550mJ
SOT223
Description
Self-protected low side MOSFET. Monolithic over temperature, over
S
current, over voltage (active clamp) and ESD protected logic level
power MOSFET intended as a general purpose switch.
D
D
IN
Features
Note:
• Short circuit protection with auto restart
• Over-voltage protection (active clamp)
• Thermal shutdown with auto restart
The tab is connected to the drain pin, and must
be electrically isolated from the source pin.
Connection of significant copper to the tab is
recommended for best thermal performance.
• Over-current protection
• Input protection (ESD)
• High continuous current rating
• Load dump protection (actively protects load)
• Logic level input
Ordering information
Device
BSP75GTA
BSP75GTC
Reel size
(inches)
7
13
Device marking
BSP75G
Tape width
(mm)
12mm embossed
12mm embossed
Quantity per reel
1,000
4,000
Issue 4 - May 2006
1
© Zetex Semiconductors plc 2006
www.zetex.com