SLV1536A-LF Datasheet, PDF (2/2 Pages) Z-Communications, Inc – VOLTAGE CONTROLLED OSCILLATOR

VOLTAGE CONTROLLED OSCILLATOR
1550
TUNING CURVE, typ.
SLV1536A-LF
PAGE 2
1540
1530
1520
85 °c
25 ^°c
-40 °c
1510
0
0.5
1
1.5
2
2.5
3
8
7
6
5
4
3
2
1
0
1518
1522
1525
TUNING VOLTAGE (Vdc)
POWER CURVE, typ.
1529 1532 1535 1538
FREQUENCY (MHz)
PHYSICAL DIMENSIONS
3.5
1540
4
1543
4.5
85 °c
25 ^°c
-40 °c
1545
© Z-Communications, Inc.
Z-COMM
SLVXXXXX-LF
W/O#
D/C
NOTES
1. The inside radius of all 16 half holes at the perimeter of the
board are plated to provide a surface for the attachment of
the VCO Module to the PCB. 13 pads are for grounding,
3 pads are for RFout and power supplies.
2. The surface of the shield is tin-plated and may be soldered to.
The shield's base metal is cold rolled steel.
3.The ground plane on the bottom side is ground and attaches
to a ground track on the top side of the board as well as to
the shield.
4. Unless otherwise noted all dimensions are in inches.
5. Unless otherwise noted all tolerances are as follows:
.xxx = ± .010
P1 Vt
P2 RF Out
P3 Vcc
Rest: Ground
Page 2
Printed in the U.S.A.