SLV1425A-LF Datasheet, PDF (2/2 Pages) Z-Communications, Inc – VOLTAGE CONTROLLED OSCILLATOR

VOLTAGE CONTROLLED OSCILLATOR
1460
TUNING CURVE, typ.
SLV1425A-LF
PAGE 2
1450
1440
1430
1420
85 °c
25 ^°c
-40 °c
1410
1400
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 7.5 8 8.5 9 9.5 10
TUNING VOLTAGE (Vdc)
POWER CURVE, typ.
10
9
8
7
6
5
4
3
2
1
0
1407 1411 1415 1420 1424 1429 1433 1437 1441 1443 1445 1447 1448 1449
FREQUENCY (MHz)
PHYSICAL DIMENSIONS
85 °c
25 ^°c
-40 °c
© Z-Communications, Inc.
Z-COMM
SLVXXXXX-LF
W/O#
D/C
NOTES
1. The inside radius of all 16 half holes at the perimeter of the
board are plated to provide a surface for the attachment of
the VCO Module to the PCB. 13 pads are for grounding,
3 pads are for RFout and power supplies.
2. The surface of the shield is tin-plated and may be soldered to.
The shield's base metal is cold rolled steel.
3.The ground plane on the bottom side is ground and attaches
to a ground track on the top side of the board as well as to
the shield.
4. Unless otherwise noted all dimensions are in inches.
5. Unless otherwise noted all tolerances are as follows:
.xxx = ± .010
P1 Vt
P2 RF Out
P3 Vcc
Rest: Ground
Page 2
Printed in the U.S.A.