CRO6000Z Datasheet, PDF (2/2 Pages) Z-Communications, Inc – VOLTAGE CONTROLLED OSCILLATOR

LOW COST - HIGH PERFORMANCE
VOLTAGE CONTROLLED OSCILLATOR
6050
6040
6030
6020
6010
6000
5990
5980
5970
5960
5950
0
10
9
8
7
6
5
4
3
2
1
0
5963
0.5
1
5971 5978
TUNING CURVE, typ.
1.5
2
2.5
3
TUNING VOLTAGE (Vdc)
POWER CURVE, typ.
5985 5992 6000 6008
FREQUENCY (MHz)
PHYSICAL DIMENSIONS
3.5
6016
4
6024
CRO6000Z
PAGE 2
85 °c
25 ^°c
-40 °c
4.5
25 ^°c
6031
VCO-24H
415-0096 REV. A
(DRAWING NOT TO SCALE)
0.220
0.000
0.025
0.178
0.263
0.348
0.433
0.518
0.603
0.688
0.841
0.866
DETAIL A
TABS RANGE:
SEE NOTE 5
(4 PLACES)
PIN 1
.055
.032
BOTTOM
SEE DETAIL A
.015
.030
DETAIL B (TYP)
(3 PLACES)
SEE DETAIL B
© Z-Communications, Inc.
Page 2
24 23 22 21 20
1
19
2
18
3
17
4
16
5
TOP
15
6
14
7
13
8 9 10 11 12
P1 RF OUTPUT
P2-12 GROUND
P13 VCC
P14-16 GROUND
P17 Vtune
P18-24 GROUND
1. The inside radius of all 24 half holes at the
perimeter of the board are plated to provide a
surface for the attachment of the VCO Module to
the PCB. 21 pads are for grounding.
2. The surface of the shield is tin-plated and may
be soldered to. The shield's base metal is cold rolled
steel.
3.The ground plane on the bottom side is ground
and attaches to a ground track on the top side of
the board as well as to the shield.
4. Unless otherwise noted all dimensions are in
inches.
5. Unless otherwise noted all tolerances are as
follows:
.xxx = ± .010
Printed in the U.S.A.