MTVX2602 Datasheet, PDF (120/147 Pages) Zarlink Semiconductor Inc – Managed 24 Port 10/100 Mbps Ethernet Switch

Ball No(s)
Test Facility
U3, C10
MVTX2602
Symbol
I/O
T_MODE0, T_MODE1
I/O-TS
F3
SCAN_EN
E27
SCANMODE
System Clock, Power, and Ground Pins
E1
SCLK
K12, K13, K17,K18
M10, N10, M20, N20,
U10, V10, U20, V20,
Y12, Y13, Y17, Y18
VDD
F13, F14, F15, F16,
F17, N6, P6, R6, T6,
U6, N24, P24, R24,
T24, U24, AD13, AD14,
AD15, AD16, AD17
VCC
M12, M13, M14, M15,
M16, M17, M18, N12,
N13, N14, N15, N16,
N17, N18, P12, P13,
P14, P15, P16, P17,
P18, R12, R13, R14,
R15, R16, R17, R18,
T12, T13, T14, T15,
T16, T17, T18, U12,
U13, U14, U15, U16,
U17, U18, V12, V13,
V14, V15, V16, V17,
V18,
VSS
F1
AVCC
D1
AGND
MISC
D22
SCANCOL
D23
SCANCLK
E23
SCANLINK
F2
RESIN#
G2
RESETOUT#
Input with pull down
Input with pull down
Input
Power
Power
Power Ground
Analog Power
Analog Ground
Input
Input/ output
Input
Input
Output
120
Zarlink Semiconductor Inc.
Data Sheet
Description
Test Pins
00 – Test mode – Set Mode
upon Reset, and provides
NAND Tree test output during
test mode
01 - Reserved - Do not use
10 - Reserved - Do not use
11 – Normal mode. Use external
pull up for normal mode
Scan Enable
0 - Normal mode (open)
1 – Enable Test mode
0 - Normal mode (open)
System Clock at 100 MHz
+2.5 Volt DC Supply
+3.3 Volt DC Supply
Ground
Analog +2.5 Volt DC Supply
Analog Ground
Scans the Collision signal of
Home PHY
Clock for scanning Home PHY
collision and link
Link up signal from Home PHY
Reset Input
Reset PHY