ZL60013 Datasheet, PDF (1/6 Pages) Zarlink Semiconductor Inc – 1310 nm, 1550 nm 1.5 Gbps PIN Preamplifier for SDI HDTV

Features
• Data rate up to 1.5 Gbps
• 1310 nm, 1550 nm PIN
• TIA with AGC
• Handles DC-unbalanced signals
• Wide dynamic range
• TO-46 assembly
• 3.3 V power supply
• SMF and MMF
Applications
• ANSI/SMPTE 292M
ZL60013
1310 nm, 1550 nm 1.5 Gbps PIN
Preamplifier for SDI HDTV
Data Sheet
December 2003
Ordering Information
ZL60013TED, TO-46 with lens in SC-housing
-40°C to +85°C
Description
This optical receiver is designed for SDI (Serial Digital
Interface) HDTV (high definition television) optical fiber
transmission systems. The product follows the
ANSI/SMPTE 292 M standard and is capable of
handling DC-unbalanced (pathological) signals.
The receiver operates at 3.3 V and contains an InGaAs
PIN photodiode and a transimpedance amplifier with
AGC (Automatic Gain Control ), assembled in a TO-46
package. Its double-lens optical system is designed for
use with single-mode fiber as well as multi-mode fiber
with a core diameter up to 62.5 µm. Reliability
assurance is based on Telecordia GR-468-CORE. The
product is supplied in SC-housing as standard as
defined by ANSI/SMPTE 292 M standard.
V_CC
Data Out
Data Out
Case
GND
Bottom View
Figure 1 - Pin Diagram
V_CC
DDaattaa
D_Da_ata_ta
GND
Figure 2 - Functional Schematic
1
Zarlink Semiconductor Inc.
Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc.
Copyright 2003, Zarlink Semiconductor Inc. All Rights Reserved.