YB1508 Datasheet, PDF (2/7 Pages) YOBON TECHNOLOGIES,INC. – Step-up DC-DC Converter , White LED Driver

Pin Description
YB1508
Step-up DC-DC Converter , White LED Driver
Figure 2：YB1508 SOT23-5
Pin Designator
Table 1 :
Pin
Name
1
SW
2
GND
3
FB
4
CTRL
5
VIN
Description
Switching Pin. This is the collector of the internal NPN power switch. Connect to
inductor and diode. Minimize the metal trace area connected to this pin to reduce
EMI.
Ground Pin. Connect directly to local ground plane.
Feedback Pin. Reference voltage is 200mV. Connect LEDs and a resistor at this
pin. LED current is determined by the resistance and CTRL voltage.
Shutdown Pin and Dimming Control pin.
A. VCTRL > 1.8V generates full-scale LED current
B. VCTRL < 0.4V chip is off
C. Switching from 0.4V to 2.0V, PWM duty cycle controls the LED current
Input Supply Pin. Bypass this pin with a capacitor as close to the device as
possible.
Ordering Information
Table 2:
Order Number
High Ovp YB1508
Low Ovp YB1508P
Package Type
SOT23-5
SOT23-5
Supplied as
3000 units Tape & Reel
3000 units Tape & Reel
Package Marking
Y58
Y58P
YB1508 MRev1.4
WWW.YOBON.COM.TW
2