YB1300S_09 Datasheet, PDF (2/8 Pages) YOBON TECHNOLOGIES,INC. – Switched Capacitor Boost Converter 5V/4.5V

YB1300S
Switched Capacitor Boost Converter 5V/4.5V
Pin Configuration
VOUT ₁
6 ^CP
GND ₂
5 ^VIN
EN ₃
4 ^CN
SOT23-6
Figure 2: Pin Configuration
Pin Description
Table 1
Pin
Name
Description
1
VOUT
Regulated output voltage. V_OUT should be bypassed with a low ESR
capacitor for the best performance.
2
GND Ground pin.
3
EN
1.2V or above will turn on the IC. Below 0.4V will put the chip in the
shutdown mode.
4
CN Pumping capacitor negative terminal.
5
VIN
Input supply voltage. V_IN should be bypassed with a 2.2μF low ESR
capacitor.
6
CP
Pumping capacitor positive terminal.
Ordering Information
Order Number
YB1300ST26S450
YB1300ST26S500
Package Type
Supplied As
SOT23-6 3000 Units Tape & Reel
SOT23-6 3000 Units Tape & Reel
Package Marking
TBB
TBA
YB1300S Rev.1.2
www.yobon.com.tw
2