5KP5.0 Datasheet, PDF (1/4 Pages) MIC GROUP RECTIFIERS – PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

5000W Transient Voltage Suppressors 5KP5.0~5KP110CA
Features
5000w peak pulse power capability
Excellent clamping capability
Low incremental surge resistance
Fast response time:typically less than 1.0ps from 0v to
VBR for unidirectional and 5.0ns ror bidirectional types.
High temperature soldering guaranteed:
265°C/10S/9.5mm lead length at 5 lbs tension
Mechanical Data
Case_{: R-6 molded plastic body over passivated junction}
Terminals : Plated axial leads, solderable per MIL-STD-750, Method 2026
Polarity: Color band denotes cathode except for bidirectional types
Mounting Position : Any
Weight _{: 0.072 ounce,2.05 grams}
R-6
0.360(9.1)
0.340(8.6)
DIA.
1.0 (25.4)
MIN.
0.360(9.5)
0.340(8.6)
0.052(1.3)
0.035(0.9)
DIA.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
Available in unidirectional only
Devices For Bidirectional Applictions
For bidirectional use suffix C or CA for types 5KP5.0 thru 5KP110 (e.g. 5KP5.0CA,5KP110CA)Electrical
characteristics apply in both directions.
Maximum Ratings And Electrical Characteristics
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS
VALUE
UNITS
Peak power dissipation
Peak pulse reverse current
(Note 1)
(Note 1, Fig.3)
Pppm
Ippm
Minimum 5000
See Table 1
Steady state power dissapation (Note 2)
Peak forward surge current (Note 3)
Maximum instantaneous forward voltage at 100A
for unidirectional only
(Note 3)
Operating junction and storage temperature range
PM(AV)
IFSM
VF
TSTG,TJ
8.0
400
3.5
-55 to + 175
Notes:
1.10/1000μs waveform non-repetitive current pulse,per Fig.3 and derated above Ta=25 C per Fig.2
2.TL=75 C,lead lengths 9.5mm,Mounted on copper pad atea of (20x20mm)Fig.5
3.Measured on 8.3ms single half sine-wave or equivalent square wave,duty cycle=4 pulses per minute maximum.
Watts
Amps
Watts
Amps
Volts
C