S3AB Datasheet, PDF (1/2 Pages) Won-Top Electronics – 3.0A SURFACE MOUNT GLASS PASSIVATED STANDARD DIODE

YENYO
S3AB THRU S3MB
Surface Mount Standard Rectifier
Features
 Low forward voltage drop
 High current capability
 Low reverse leakage current
 High surge current capability
 Glass passivated chip
Mechanical Data
 Case: Molded plastic SMB/DO-214AA
 Epoxy: UL 94V-0 rate flame retardant
 Terminals: Solderable per MIL-STD-750
method 2026
 Polarity:Color band denotes cathode end
 Mounting position: Any
 Weight: 0.093 gram
Voltage Range 50 to 1000 V
Current 3.0 Ampere
SMB/DO-214AA
.086(2.17)
.077(1.94)
.155(3.89)
.130(3.26)
.096(2.42)
.084(2.11)
.060(1.51)
.030(0.75)
.180(4.52)
.160(4.02)
.012(0.30)
.006(0.15)
.006(.15)
0 (.0 )
.220(5.51)
.205(5.14)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
PARAMETER
SYMBOL S3AB S3BB S3DB S3GB S3JB S3KB S3MB UNIT
Maximum Recurrent Peak Reverse Voltage VRRM
50
Maximum RMS Voltage
VRMS
35
Maximum DC Blocking Voltage
VDC
50
Maximum Average Forward Rectified
Current TL=75^oC
I(AV)
Peak Forward Surge Current, 8.3ms single
Half sine-wave superimposed on rated load IFSM
(JEDEC method)
Maximum Instantaneous Forward Voltage
VF
@ 3.0 A
Maximum DC Reverse Current @TA=25^oC
At Rated DC Blocking Voltage @TA=125^oC
IR
Typical junction Capacitance (Note 1)
CJ
Typical Thermal Resistance (Note 2)
R JL
Operating Junction and Storage
Temperature Range
TJ,TSTG
NOTES : (1) Measured at 1.0 MHZ and applied reverse voltage of 4.0 V DC.
(2) Mounted on P.C. Board with 8.0mĔ land area.
100 200 400 600 800 1000 V
70
140 280 420 560 700 V
100 200 400 600 800 1000 V
3.0
A
100
A
1.2
5.0
250
60
13
-65 to +150
V
uA
uA
pF
o_C/W
o_C
1/2
R2, SEP-14