3.0SMCJ Datasheet, PDF (1/4 Pages) Taiwan Semiconductor Company, Ltd – Surface Mount Transient Voltage Suppressor

YENYO
3.0SMCJ SERIES
Surface Mount Transient Voltage Suppressor
Features
 For surfsce mounted applications
 Reliable low cost construction utilizing
molded plastic technique
 Plastic material has UL flammability
classification 94V-0
 Typical IR less than 1uA above 10V
 Fast response time: typically less than 1.0
ns for Uni-direction, less than 5.0ns for
Bi-direction, form 0Volts to BV min
Mechanical Data
 Case: Molded plastic SMC/DO-214AB
 Polarity:by cathode band denotes uni-
directional device none cathode band
denotes bi-directional device
 Weight: 0.21 gram
Stand-off Voltage 5.0 to 220 V
Power Dissipation 3000 Watts
SMC/DO-214AB
.108(2.75)
.128(3.25)
.220(5.59)
.245(6.22)
.079(2.00)
.103(2.62)
.030(0.76)
.060(1.52)
.260(6.60)
.280(7.11)
.006(.152)
.012(.305)
.002(.051)
.008(.203)
.305(7.75)
.320(8.13)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25^oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
PARAMTER
SYMBOL
VALUE
UNIT
Peak Power Dissipation at TA=25^oC
TP=1ms (Note 1,2)
Peak Forward Surge Current, 8.3ms single
Half sine-wave super imposed on rated load
(Note 3)
(JEDEC method)
Steady State Power Dissipation at TA=75^oC
PPK
IFSM
PM(AV)
Minimum 3000
100
8.0
Watts
A
Watts
Maximum lnstantaneous forward voltage
VF
at 35A for unidirectional devices only (Note 3)
3.5
V
Operating Junction and Storage Temperature
Range
TJ, TSTG
-55 to +150
o_C
NOTES : (1) Non-repetitive current pulse, per fig. 3 and derated above TA=25^oC per fig. 1.
(2) Thermal Resistance junction to ambient.
(3) 8.3ms single half-sine wave duty cycle= 4pulses maximum per minute(unidirectional units only).
1/4
R2, NOV-12