UF800F Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – ISOLATION ULTRAFAST SWITCHING RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 8.0 Amperes)

DATA SHEET
SEMICONDUCTOR
UF800F~UF8010F
ULT RAFAST SWITCHING RECTIFIERS
VOLTAGE- 50 to 1000 Volts CURRENT - 8.0 Ampere
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O utilizing
Flame Retardant Epoxy Molding Compound.
• Exceeds environmental standards of
MIL-S-19500/228
• Low power loss, high efficiency.
• Low forwrd voltge, high current capability
• High surge capacity.
• Ultra fast recovery times, high voltage.
• High temperature soldering : 260^OC / 10 seconds at terminals
• Pb free product at available : 99% Sn above meet RoHS environment
substance directive request
MECHANICAL DATA
• Case: ITO-220AC full molded plastic package
• Terminals: Lead solderable per MIL-STD-202, Method 208
• Polarity: As marked.
• Standard packaging: Any
• Weight: 0.08 ounces, 2.26grams.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
.130(3.3)
MAX
.185(4.8)
MAX
ITO-220AC Unit:inch(mm)
.406(10.3)MAX
.134(3.4)DIA
.113(3.0)DIA
.112(2.85)
.100(2.55)
.272(6.9)
.248(6.3)
.606(15.4)
.583(14.8)
.114(2.9 )
.098(2.5)
.032(0.8)
MAX
.055(1.4)
MAX
.035(0.9)
MAX
.100(2.55)
.161(4.1)
MAX
.543(13.8)
.512(13.0)
.100(2.55)
UF800F UF801F UF802F UF803F UF804F UF806F UF808F UF8010F UNITS
Maximum Recurrent Peak Reverse V oltage
50
100
200
300
400
600
800
1000
V
Maximum RMS Voltage
35
70
140
210
280
420
560
700
V
Maxi mum DC Bl ocking Voltage
50
100
200
300
400
600
800
1000
V
Maximum Average Forward Rectif ied Current at Tc=100°C
8.0
A
Peak Forward Surge Current ,
8.3 ms single half sine- wave
125
A
super imposed on rated load (J EDEC method)
Maximum Instantaneous Forward Vol tage
at 8.0A per element
1.0
1.30
1.50
1.70
V
Maxi mum DC Reverse Cur rent (Note 1) Ta=25°C
at Rated DC Blocking Voltage
Ta=125°C
10
µA
500
Typical Junction Capacitance (Note 1)
80
50
pF
Maximum Reverse Recovery Time (Note 2)
50
75
ns
Typical Thermal Resistance Note RθJC
15
°C/W
Operating and Storage Temperature Range TJ
-55 to +150
°C
NOTES:
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC.
2. Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A.
3. Thermal resistance from Junction to ambient and from junction to lead 0.375” (9.5mm) P.C.B mounted.
http://www.yeashin.com
1
REV.02 20110725