UF5400 Datasheet, PDF (1/3 Pages) Jinan Gude Electronic Device – 3.0 AMP. ULTRA FAST RECTIFIERS

DATA SHEET
SEMICONDUCTOR
UF5400 thru UF5408
1.FEATURES
* Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
* High temperature metallurgically
bonded construction
Ultrafast Rectifiers
Reverse Voltage 50 to 1000V
Forward Current 3.0A
* Diffused junction
* Capable of meeting environmental standards
of MIL-S-19500
* For use in high frequency rectifier circuits
* Ultrafast recovery time for high efficiency
* High temperature soldering guaranteed:
260°C/10 seconds
* 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension
2.Mechanical Data
Case: JEDEC DO-201AD, molded plastic body
Terminals: Plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.04 oz., 1.13 g
Handling precautin:None
3.Electrical Characteristic
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter Symbol
symbol
UF54 UF54 UF54 UF54 UF54 UF54 UF54 UF54 UF54
00 01 02 03 04 05 06 07 08
Unit
Maximum repetitive peak reverse voltage
V_RRM
50 100 200 300 400 500 600 800 1000 V
Maximum RMS voltage
V_RMS
35 70 140 210 280 350 420 560 700 V
Maximum DC blocking voltage
V_DC
50 100 200 300 400 500 600 800 1000 V
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA = 55°C
I_F(AV)
3.0
A
Peak forward surge current 8.3ms single half
sine-wave superimposed on rated load (JEDEC
I_FSM
Method)
150
A
Typical thermal resistance (Note 2)
RθJ_A
20
°C/W
Maximum DC blocking voltage temperature
T_A
150
°C
Operating junction temperature range
T_J
–50 to +150
°C
Storage temperature range
T_STG
–50 to +150
°C
Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
Parameter Symbol
symbol
UF54 UF54 UF54 UF54 UF54 UF54 UF54 UF54 UF54
00 01 02 03 04 05 06 07 08
Unit
Maximum instantaneous forward voltage at 3.0A
V_F
1.00
1.30
1.70
V
Maximum DC reverse current TA = 25°C
at rated DC blocking voltage TA = 100°C
IR
10
200
µA
Typical reverse recovery time (Note 1)
trr
50
75
ns
Typical junction capacitance at 4.0V, 1MHz
CJ
45
36
PF
NOTES:
1. IF = 0.5A, IR = 1.0A, IRR = 0.25A
2. Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted
http://www.yeashin.com
1
REV.02 20110725