UF1600CT Datasheet, PDF (1/2 Pages) Won-Top Electronics – 16A ULTRAFAST GLASS PASSIVATED RECTIFIER

DATA SHEET
SEMICONDUCTOR
UF1600CT~UF1608CT
ISOLATION ULTRAFAST RECOVERY RECTIFIERS
50 to 800 Volts 16 Amperes CURRENT
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O utilizing
Flame Retardant Epoxy Molding Compound.
• Exceeds environmental standards of
.419(10.66)
MAX
TO-220AB
DIA
.139(3.55)
.MIN
Unit:inch(mm)
.196(5.0)
.163(4.16)
.054(1.39)
.045(1.15)
MIL-S-19500/228
• Low power loss, high efficiency.
• Low forwrd voltge, high current capability
• High surge capacity.
• Ultra fast recovery times, high voltage.
• High temperature soldering : 260^OC / 10 seconds at terminals
• Pb free product at available : 99% Sn above meet RoHS environment
substance directive request
MECHANCALDATA
.269(6.85)
.226(5.75)
.177(4.5)
.MAX
PIN1 2 3
.038(0.96)
.019(.5)
.624(15.87)
.548(13.93)
.50(12.7)
MAX
.100(2.54)
.114(2.9)
.098(2.5)
.025(0.65)
MAX
• Case: ITO-220AB full molded plastic package
• Terminals: Lead solderable per MIL-STD-202, Method 208
• Polarity: As marked.
• Standard packaging: Any
AC
Positive CT
AC
• Weight: 0.08 ounces, 2.26grams.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
RETEMARAP
UF
UF
UF
UF
UF
UF
UF
SYMBOL
UNITS
1600CT 1601CT 1602CT 1603CT 1604CT 1606CT 1608CT
Maximum Recurrent Peak Reverse V oltage
VRRM
50
100
200
300
400
600
800
V
Maximum RMS Voltage
VRMS
35
70
140
210
280
420
560
V
Maximum DC Blocking Voltage
VDC
50
100
200
300
400
600
800
V
Maximum Average Forward Current .375”(9 .5mm)
IAV
16
A
Peak Forward Surge Current :8.3ms single half
IFSM
125
A
si ne-wave superimposed on rated load(JEDEC method)
Maximum Forward Voltage at 8.0A
VF
1.0
1.30
1.70
V
Maxi mum DC Reverse curr ent TA=25
IR
at Rated DC Blocking Voltage TA =125
10
µA
500
Typical Junction Capaci tance (Note 1)
CJ
170
130
pF
Maximum Reverse Recovery Time (Note 2)
TRR
50
75
ns
Typical Thermal Resistance (Note 3 )
R JC
2
°C/W
Oper ating Junction and Storage Temperature Range
TJ,TSTG
-55 to +150
°C
NOTES:
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC.
2. Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A.
3. Thermal resistance from Junction to ambient and from junction to lead 0.375” (9.5mm) P.C.B mounted.
http://www.yeashin.com
1
REV.02 20110725