UF1000F Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – ULTRAFAST SWITCHING RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 10.0 Amperes)

DATA SHEET
SEMICONDUCTOR
UF1000F~UF1008F
ULT RAFAST SWITCHING RECTIFIER
VOLTAGE - 50 to 800 Volts CURRENT - 10.0 Amperes
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O Utilizing
Flame Retardant Epoxy Molding Compound
• Exceeds environmental standards of MIL-S-19500/228
• Low power loss, high efficiency
• Low forward voltage, high current capability
• High surge capacity
• Ultra Fast recovery times, high voltage
• High temperature soldering : 260^OC / 10 seconds at terminals
• Pb free product at available : 99% Sn above meet RoHS environment
substance directive request
MECHANCALDATA
• Case: ITO-220AC full molded plastic package
• Terminals: Lead solderable per MIL-STD-202, Method 208
• Polarity: As marked
• Mounting Position: Any
• Weight: 0.08 ounce, 2.26 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ^OC•ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
.185(4.8)
MAX
.130(3.3)
MAX
ITO-220AC Unit:inch(mm)
.406(10.3)MAX
.134(3.4)DIA
.113(3.0)DIA
.112(2.85)
.100(2.55)
.272(6.9)
.248(6.3)
.606(15.4)
.583(14.8)
.114(2.9)
.098(2.5)
.032(0.8)
MAX
.055(1.4)
MAX
.035(0.9)
MAX
.100(2.55)
.161(4.1)
MAX
.543(13.8)
.512(13.0)
.100(2.55)
TYPE NUMBER
UF1000F UF1001F UF1002F UF1003F UF1004F UF1006F UF1008F UNITS
Maximum Recurrent Peak Reverse V oltage
50
100
200
300
400
600
800
V
Maximum RMS Voltage
35
70
140
210
280
420
560
V
Maximum DC Blocking Voltage
50
100
200
300
400
600
800
V
Maximum Average Forward Rectif ied
Cur rent . 375” (9.5mm) lead length @ TC=100 °C
10
A
Peak Forward Surge Current , 8.3ms single half sine
wave superimposed on rated load(J ECEC method)
150
A
Maximum Instantaneous Forward Voltage a t 10.0A
1.0
1.3
1.7
V
Maxi mum DC Reverse Current @TA=25°C
at Rated DC Blocking Vol tage @TA=125 °C
10.0
µA
500
Maximum Reverse Recovery Time(Note 1)
50
75
nS
Typi cal Junction capaci tance (Note 2)
80
50
pF
Typi cal Junction Resi stance (Note 2) R JA
Operating and Storage Temperature Range T J,TSTG
15
-55 to +150
°C/W
°C
NOTES:
1. Reverse Recovery Test Conditions: IF=0.5A, IR=1A, Irr=0.25A
2. Measured at 1 MHz and applied reverse voltage of 4.0 VDC
3. Thermal resistance from junction to ambient and from junction to lead length 0.375"(9.5mm) P.C.B.mounted
http://www.yeashin.com
1
REV.02 20110725