UF1000CT Datasheet, PDF (1/2 Pages) Won-Top Electronics – 10A ULTRAFAST GLASS PASSIVATED RECTIFIER

DATA SHEET
SEMICONDUCTOR
UF1000CT~UF1008CT
ULT RAFAST SWITCHING RECTIFIERS
VOLTAGE- 50 to 800 Volts CURRENT - 10.0 Ampere
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O utilizing
Flame Retardant Epoxy Molding Compound.
• Exceeds environmental standards of
MIL-S-19500/228
• Low power loss, high efficiency.
• Low forwrd voltge, high current capability
• High surge capacity.
• Ultra fast recovery times, high voltage.
• High temperature soldering : 260^OC / 10 seconds at terminals
• Pb free product at available : 99% Sn above meet RoHS environment
substance directive request
MECHANCALDATA
• Case: TO-220AB full molded plastic package
• Terminals: Lead solderable per MIL-STD-202, Method 208
• Polarity: As marked.
• Standard packaging: Any
• Weight: 0.08 ounces, 2.24grams.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
.269(6.85)
.226(5.75)
.419(10.66)
MAX
TO-220AB
DIA
.139(3.55)
.MIN
Unit:inch(mm)
.196(5.0)
.163(4.16)
.054(1.39)
.045(1.15)
.624(15.87)
.548(13.93)
.177(4.5)
.MAX
PIN1 2 3
.038(0.96)
.019(.5)
.50(12.7)
MAX
.114(2.9)
.098(2.5)
.100(2.54)
AC
Positive CT
AC
.025(0.65)
MAX
UF1000CT UF1001CT UF1002CT UF1003CT UF1004CT UF1006CT UF1008CT UNITS
Maximum Recurrent Peak Reverse Voltage
50
100
200
300
400
600
800
V
Maximum RMS Voltage
35
70
140
210
280
420
560
V
Maxi mum DC Blocking Voltage
50
100
200
300
400
600
800
V
Maximum Average Forward Rect if ied Current at Tc=100°C
10
A
Peak For ward Surge Current ,
8.3 ms single half sine- wave
125
A
superimposed on rated load (J EDEC method)
Maximum Instantaneous Forward Vol tage
at 5.0A per element
1.0
1.30
1.70
V
Maxi mum DC Reverse Current (Note 1) Ta=25° C
at Rated DC Block ing Vol tage Ta=125°C
10
µA
500
Maxi mum DC Reverse Cur rent (Note 1) Ta=25°C
at Rated DC Block ing Voltage
Ta=125°C
50
100
pF
Maximum Reverse Recovery Time (Note 2)
50
75
ns
Typical Thermal Resistance Note RθJC
15
°C/W
Oper ati ng and Storage Temperature Range TJ
-55 to +150
°C
NOTES:
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC.
2. Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A.
3. Thermal resistance from Junction to ambient and from junction to lead 0.375” (9.5mm) P.C.B mounted.
http://www.yeashin.com
1
REV.02 20110725