SS12 Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

DATA SHEET
SEMICONDUCTOR
SS12 THRU SS120
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
VOLTAGE- 20 to 200 Volts CURRENT- 1.0 Amperes
FEATURES
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
For surface mounted applications
Low profile package
Built-in strain relief
Metal to silicon rectifier. majority carrier conduction
Low power loss,high efficiency
High surge capacity
High current capacity ,low VF
For use in low voltage high frequency inverters, free wheeling,
and polarity protection applications.
High temperature soldering guaranteed: 260°C /10 seconds
at terminals
High temperature soldering : 260^OC / 10 seconds at terminals
Pb free product at available : 99% Sn above meet RoHS
environment substance directive request
MECHANICAL DATA
Case: JEDEC DO-214AC molded plastic
Terminals:Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes positive end (cathode)
Standard packaging: 12mm tape (EIA-481)
SMA/DO-214AC Unit:inch(mm)
.062(1.60)
.047(1.20)
.114(2.90)
.098(2.50)
.181(4.60)
.157(4.00)
.096(2.44)
.078(2.00)
.060(1.52)
.030(0.76)
.008(.203 )
.002(.051)
.208(5.28)
.188(4.80)
.012(.305)
.006(.152)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Resistive or inductive load.
SYMBOLS SS12 SS13 SS14 SS15 SS16 SS18 SS19 SS110 SS115 SS120 UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
20 30 40 50 60 80 90 100 150 200
V
Maximum RMS Voltage
VRMS
14 21 28 35 42 56 64 71 105 140
V
Maximum DC Blocking Voltage
VDC
20 30 40 50 60 80 90 100 150 200
V
Maximum Average Forward Rectified Current
I(AV)
1.0
A
at TL (See figure 1)
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed
IFSM
30.0
A
on rated load (JEDEC method)
Maximum Instantaneous Forward Voltage at 1.0A
VF
(Note 1)
0.50
0.70
0.85
0.87 0.90
V
Maximum DC Reverse Current (Note 1) Ta= 25°C
IR
at Rated DC Blocking Voltage Ta=100°C
0.5
mA
20.0
Maximum Thermal Resistance(Note 2)
RθJL
RθJA
28.0
°C/W
88.0
Operating Temperature Range
TJ
-55 to +150
°C
Storage Temperature Range
TSTG
-55 to +150
°C
NOTES:
1.Pul se Test with PW =300µsec, 2% Duty Cycle.
2.Moun ted on P.C. Board with 5.0mm2 (.013mm thick) copper pad areas.
http://www.yeashin.com
1
REV.03 20140513