SR52 Datasheet, PDF (1/2 Pages) Mospec Semiconductor – SCHOTTKY BARRIER RECTIFIERS(5.0A,20-60V)

DATA SHEET
SEMICONDUCTOR
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
VOLTAGE- 20 to 100 Volts CURRENT- 5.0 Amperes
SR52~SR510
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
• For surface mounted applications
• Low profile package
• Built-in strain relief
• Metal to silicon rectifier. majority carrier conduction
• Low power loss,high efficiency
• High surge capacity
• For use in low voltage high frequency inverters, free wheeling,
and polarity protection applications
• High temperature soldering guaranteed: 260°C /10 seconds at terminals
MECHANICAL DATA
Case: JEDEC DO-214AA molded plastic
Terminals:Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes positive end (cathode)
Standard packaging: 12mm tape (EIA-481)
Weight: 0.003 ounce, 0.093 gram
SMB/DO-214AA Unit:inch(mm)
.083(2.11)
.075(1.91)
.155(3.94)
.130(3.30)
.096(2.44)
.083(2.13)
.060(1.52)
.030(0.76)
.185(4.70)
.160(4.06)
.012(.305)
.006(.152)
.008(.203)
.002(.051)
.220(5.59)
.200(5.08)
.012(.31)
.006(.15)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Resistive or inductive load.
Maximum Recurrent Peak Reverse Voltage
SYMBOLS SR52 SR53 SR54 SR55 SR56 SR58 SR59 ^SR510
VRRM _{20.0 30.0 40.0 50.0 60.0 80.0 90.0 100.0}
UNITS
V
Maximum RMS Voltage
VRMS 14.0 21.0 28.0 35.0 42.0 56.0 63.0 70.0
V
Maximum DC Blocking Voltage
VDC
20.0 30.0 40.0 50.0 60.0 80.0 90.0 100.0
V
Maximum Average Forward Rectified Current
at T_L (See figure 1)
I(AV)
5.0
A
Peak Forward Surge Current 8.3ms single half sine-wave
superimposed on rated load (JEDEC method)
IFSM
100.0
A
Maximum Instantaneous Forward Voltage at 5.0A (Note A)
VF
0.55
0.75
0.85
V
Maximum DC Reverse Current (Note A) Ta= 25°C
at Rated DC Blocking Voltage
Ta=100°C
IR
0.5
mA
20.0
Maximum Thermal Resistance(Note B)
RθJL
RθJA
17.0
55.0
°C/W
Operating Temperature Range
Storage Temperature Range
TJ
TSTG
-55 to +150
°C
-55 to +150
°C
NOTES:
A.Pulse Test with PW =300µsec, 2% Duty Cycle.
B.Mounted on P.C. Board with 14mm² (.013mm thick) copper pad areas.
http://www.yeashin.com
1
REV.02 20150105