SK52 Datasheet, PDF (1/9 Pages) Pan Jit International Inc. – SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER(VOLTAGE- 20 to 100 Volts CURRENT- 5.0 Amperes)

DATA SHEET
SEMICONDUCTOR
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
VOLTAGE- 20 to 100 Volts CURRENT- 5.0 Amperes
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
• For surface mounted applications
• Low profile package
• Built-in strain relief
• Metal to silicon rectifier. majority carrier conduction
• Low power loss,high efficiency
• High surge capacity
• For use in low voltage high frequency inverters, free wheeling,
and polarity protection applications
• High temperature soldering guaranteed: 260°C /10 seconds at terminals
MECHANICAL DATA
Case: JEDEC DO-214AB molded plastic
Terminals:Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes positive end (cathode)
Standard packaging: 16mm tape (EIA-481)
Weight: 0.007 ounce, 0.21 gram
.060 (1.52)
.030 (0.76)
SK52~SK510
SMC / DO-214AB
Unit: inch ( mm )
.280 (7.11)
.260 (6.60)
.012 (.305)
.006 (.152)
.008(.203)
.002(.051)
.320 (8.13)
.305 (7.75)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Resistive or inductive load.
Maximum Recurrent Peak Reverse Voltage
SYMBOLS SK52 SK53 SK54 SK55 SK56 SK58 SK59 ^SK510
VRRM _{20.0 30.0 40.0 50.0 60.0 80.0 90.0 100.0}
UNITS
V
Maximum RMS Voltage
VRMS 14.0 21.0 28.0 35.0 42.0 56.0 63.0 70.0
V
Maximum DC Blocking Voltage
VDC
20.0 30.0 40.0 50.0 60.0 80.0 90.0 100.0
V
Maximum Average Forward Rectified Current
at T_L (See figure 1)
I(AV)
5.0
A
Peak Forward Surge Current 8.3ms single half sine-wave
superimposed on rated load (JEDEC method)
IFSM
100.0
A
Maximum Instantaneous Forward Voltage at 5.0A (Note 1)
VF
0.50
0.75
0.85
V
Maximum DC Reverse Current (Note 1) Ta= 25°C
at Rated DC Blocking Voltage
Ta=100°C
IR
0.5
mA
20.0
Maximum Thermal Resistance(Note 2)
RθJL
RθJA
17.0
55.0
°C/W
Operating Temperature Range
Storage Temperature Range
Typical total capacitance (1MHz ,VR = 4V)
TJ
TSTG
CT
-55 to +150
°C
-55 to +150
°C
280
pF
NOTES:
A.Pulse Test with PW =300µsec, 2% Duty Cycle.
B.Mounted on P.C. Board with 14mm² (.013mm thick) copper pad areas.
http://www.yeashin.com
1
REV.02 20120305