S32 Datasheet, PDF (1/2 Pages) Yea Shin Technology Co., Ltd – SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

DATA SHEET
SEMICONDUCTOR
S32 THRU S310
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
VOLTAGE- 20 to 100 Volts CURRENT- 3.0 Amperes
FEATURES
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
For surface mounted applications
Low profile package
Built-in strain relief
Metal to silicon rectifier. majority carrier conduction
Low power loss,high efficiency
High surge capacity
For use in low voltage high frequency inverters, free wheeling,
and polarity protection applications
High temperature soldering guaranteed: 260°C /10 seconds
at terminals
High temperature soldering : 260^OC / 10 seconds at terminals
Pb free product at available : 99% Sn above meet RoHS
environment substance directive request
MECHANICAL DATA
Case: SMF molded plastic
Terminals:Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes positive end (cathode)
Standard packaging: 12mm tape (EIA-481)
SMF
Unit:inch(mm)
0.141(3.60)
0.126(3.20)
0.052(1.30)
0.043(1.10)
0.189(4.80)
0.173(4.40)
0.035(0.90)TYPICAL
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Resistive or inductive load.
SYMBOLS S32 S33 S34 S35 S36 S38 S39 S310 UNITS
Marking Code
S32 S33 S34 S35 S36 S38 S39 S310
Maximum Recurrent Peak Reverse Voltage
VRRM 20.0 30.0 40.0 50.0 60.0 80.0 90.0 100.0 V
Maximum RMS Voltage
VRMS 14.0 21.0 28.0 35.0 42.0 56.0 63.0 70.0 V
Maximum DC Blocking Voltage
VDC
20.0 30.0 40.0 50.0 60.0 80.0 90.0 100.0 V
Maximum Average Forward Rectified Current
I(AV)
3.0
A
at TL (See figure 1)
Peak Forward Surge Current 8.3ms single half sine-wave
superimposed
IFSM
80.0
A
on rated load (JEDEC method)
Maximum Instantaneous Forward Voltage at 3.0A (Note 1)
VF
0.50
0.70
0.85
V
Maximum DC Reverse Current (Note 1) Ta= 25°C
IR
at Rated DC Blocking Voltage Ta=100°C
0.5
mA
20.0
mA
Maximum Thermal Resistance(Note 2)
RθJL
RθJA
17.0
°C/W
55.0
Operating Temperature Range
TJ
-55 to +150
Storage Temperature Range
TSTG
-55 to +150
NOTES:
A.Pulse Test with PW =300µsec, 2% Duty Cycle.
B.Mounted on P.C. Board with 14mm2 (.013mm thick) copper pad areas.
http://www.yeashin.com
1
REV.03 20141209