S2A Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – SURFACE MOUNT RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes)

DATA SHEET
SEMICONDUCTOR
SURFACE MOUNT RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes
S2A THRU S2M
FE ATURES
• For surface mounted applications
• High temperature metallurgically bonded-no
compression contacts as found in other
diode-constructed rectifiers
• Glass passivated junction
• Built-in strain relief
• Easy pick and place
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
• Complete device submersible temperature of
260°C for 10 seconds in solder bath
• High temperature soldering : 260^OC / 10 seconds at terminals
• Pb free product at available : 99% Sn above meet RoHS
environment substance directive request
MECHAN ICAL D ATA
• Case: JEDEC DO-214AA molded plastic
• Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
• Polarity: Indicated by cathode band
• Standard packaging: 12mm tape (EIA-481)
MAXIMUM RATINGS AND ELECTRICAL CH ARACTERISTI CS
Ratings at 25 °C Jambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SMB/DO-214AA Unit:inch(mm)
.083(21. 1 )
.075(1.9 1)
.155 (39. 4 )
.130(33. 0 )
.096 (24. 4 )
.083 (2.13)
.050(12. 7 )
.030(07. 6 )
.185(4.70)
.160(40. 6 )
.012(.3 05)
.006(.15 2)
.008(.203)
.002(.051 )
.220 (55. 9 )
.200(50. 8 )
.012(.31)
.006(.15)
SYMBOLS S2A
S2B
S2D
S2G
S2J
S2K
S2M UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800 1000 Volts
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700 Volts
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800 1000 Volts
Maximum Average Forward Rectified Current
at TL = 100 °C
I(AV)
2.0
Amps
Peak For ward Surge Current 8.3ms single h alf
sine wave
IFSM
60.0
Amps
superimposed on rated load(JEDEC method)
Maximum Instantaneous Forward Voltage at 2.0A
VF
1.1
Volts
Maximum DC Reverse Current TA=25 °C
5.0
IR
uA
At Rated DC Blocking Voltage TA=125 °C
125
Maximum Reverse Recovery Time (Note 1)
TRR
2.5
uS
Typical Junction capacitance (Note 2)
CJ
30.0
PF
Typical Thermal Resistance (Note 3)
Operating and Storage Temperature Range
R θ JL
TJ,TSTG
16
-55 to +150
°C /W
°C
NOTES:
1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A
2. Measured at 1 MHz and Applied Vr=4.0 volts
3. 8.0mm2 (.013mm thick) land areas
http://www.yeashin.com
1
REV.03 20150105