S1A Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – SURFACE MOUNT RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere)

DATA SHEET
SEMICONDUCTOR
SURFACE MOUNT RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere
S1A THRU S1M
FE ATURES
• For surface mounted applications
• High temperature metallurgically bonded-no
compression contacts as found in other
diode-constructed rectifiers
• Glass passivated junction
• Built-in strain relief
• Easy pick and place
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
• Complete device submersible temperature of
260 °C for 10 seconds in solder bath
• High temperature soldering : 260^OC / 10 seconds at terminals
• Pb free product at available : 99% Sn above meet RoHS
environment substance directive request
MECHAN ICAL D ATA
• Case: JEDEC DO-214AA molded plastic
• Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
• Polarity: Indicated by cathode band
• Standard packaging: 12mm tape (EIA-481)
MAXIMUM R ATINGS AND ELECTRICAL CH ARACTERISTI CS
Ratings at 25 °C Jambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SMB/DO-214AA Unit:inch(mm)
.083(21. 1 )
.075(1.91)
.155 (39. 4 )
.130(33. 0 )
.096 (24. 4 )
.083 (2.13)
.050(12. 7 )
.030(07. 6 )
.185(4.70)
.160(40. 6 )
.012(.305 )
.006(.152)
.008(.203)
.002(0. 51 )
.220 (55. 9 )
.200(50. 8 )
.012(.31)
.006(.15)
SYMBOLS S1A S1B
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
Maximum RMS Voltage
VRMS
35
70
Maximum DC Blocking Voltage
VDC
50
100
Maximum Average Forward Rectified Current
at TL = 100 °C
I(AV)
Peak Forward Surge Current 8.3ms single half
sine wave
IFSM
superimposed on rated load(JEDEC method)
Maximum Instantaneous Forward Voltage at 1.0A
VF
Maximum DC Reverse Current TA=25 °C
IR
At Rated DC Blocking Voltage TA=125°C
Maximum Reverse Recovery Time (Note 1)
TRR
Typical Junction capacitance (Note 2)
CJ
Typical Thermal Resistance (Note 3)
R θ JL
Operating and Storage Temperature Range
TJ,TSTG
NOTES:
1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A
2. Measured at 1 MHz and Applied Vr=4.0 volts
3. 8.0mm2 (.013mm thick) land areas
http://www.yeashin.com
1
S1D S1G S1J
200
400
600
140
280
420
200
400
600
1.0
30.0
1.10
5.0
50
2.5
12
30.0
-55 to +150
S1K S1M UNITS
800 1000 Volts
560
700 Volts
800 1000 Volts
Amps
Amps
Volts
uA
uS
PF
°C /W
°C
REV.03 20150105