S12 Datasheet, PDF (1/2 Pages) Altech corporation – 30 mm Contact Element S12

DATA SHEET
SEMICONDUCTOR
S12 THRU S110
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
VOLTAGE- 20 to 100 Volts CURRENT- 1.0 Amperes
FEATURES
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
For surface mounted applications
Low profile package
Built-in strain relief
Metal to silicon rectifier. majority carrier conduction
Low power loss,high efficiency
High surge capacity
High current capacity ,low VF
For use in low voltage high frequency inverters, free wheeling,
and polarity protection applications.
High temperature soldering guaranteed: 260°C /10 seconds
at terminals
High temperature soldering : 260^OC / 10 seconds at terminals
Pb free product at available : 99% Sn above meet RoHS
environment substance directive request
SMF
Unit:inch(mm)
0.141(3.60)
0.126(3.20)
0.052(1.30)
0.043(1.10)
MECHANICAL DATA
Case: SMF mold ed plastic
Terminals:Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes positive end (cathode)
Standard packaging: 12mm tape (EIA-481)
0.189(4.80)
0.173(4.40)
0.035(0.90)TYPICAL
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Resistive or inductive load.
SYMBOLS S12 S13 S14 S15 S16 S18 S19 S110 UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
20
30
40
50
60
80
90
100
V
Maximum RMS Voltage
VRMS
14
21
28
35
42
56
64
71
V
Maximum DC Blocking Voltage
VDC
20
30
40
50
60
80
90
100
V
Maximum Average Forward Rectified Current
I(AV)
1.0
A
at TL (See figure 1)
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed
IFSM
30.0
A
on rated load (JEDEC method)
Maximum Instantaneous Forward Voltage at 1.0A
VF
0.50
(Note 1)
0.70
0.85
V
Maximum DC Reverse Current (Note 1) Ta= 25°C
IR
at Rated DC Blocking Voltage Ta=100°C
0.5
mA
20.0
Maximum Thermal Resistance(Note 2)
RθJL
RθJA
28.0
°C/W
88.0
Operating Temperature Range
TJ
-55 to +150
°C
Storage Temperature Range
TSTG
-55 to +150
°C
NOTES:
A.Pulse Test with PW =300µsec, 2% Duty Cycle.
B.Mounted on P.C. Board with 5.0mm2 (.013mm thick) copper pad areas.
http://www.yeashin.com
1
REV.03 20140513