English
Language : 

P6SMBJ-A Datasheet, PDF (1/5 Pages) Yea Shin Technology Co., Ltd – SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
DATA SHEET
SEMICONDUCTOR
P6SMBJ -A Series
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
H
VOLTAGE 5.0 to 440 Volts 600 Watt Peak Power Pulse
FEATURES
For surface mounted applications in order to optimize board space.
Low profile package
Built-in strain relief
Glass passivated junction
Low inductance
High temperature soldering : 260OC /10 seconds at terminals
Plastic package has Underwriters Laboratory Flammability
Classification 94V-O
Pb free product at available : 99% Sn above meet RoHS
environment substance directive request
AEC-Q101 qualified
MECHANICAL DATA
Case: JEDEC DO-214AA,Molded plastic over passivated junction.
Base P/N - RoHS compliant, commercial grade
Base P/N-A - RoHS compliant, AEC-Q101 qualified
Terminals: Solder plated,solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes positive end (cathode)
Standard Packaging:12mm tape (EIA-481)
Quantify Per Reel : 3000 pcs
SMB/DO-214AA Unit:inch(mm)
.083(2.11)
.075(1.91)
.155(3.94)
.130(3.30)
.096(2.44)
.083(2.13)
.050(1.27)
.030(0.76)
.185(4.70)
.160(4.06)
.012(.305)
.006(.152)
.008(.203)
.002(.051)
.220(5.59)
.200(5.08)
.012(.31)
.006(.15)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types P6SMBJ5.0 thru types P6SMBJ440A.
Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
For Capacitive load derate current by 20%.
RATING
SYMBOL
Peak Power Dissipation on 10/1000us waveform (Note1.2 , Fig.1) Ppp
VALUE
600
Peak Forward Surge Current, 8.3ms single half sine - wave
uni- directional only (JEDEC method) (Notes 2,3)
I FSM
100
Peak Pulse Current on 10/1000s waveform(Note 1 , Fig.3)
IPP
See Table 1
Operating and Storage Temperature Range
TJ, TSTG
-55 ~ +150
NOTES:
1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25°C per Fig.2.
2. Mounted on 5.0 mm 2(0.13mm thick) land areas.
3. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
UNITS
Watts
Amps
Amps
°C
http://www.yeashin.com
1
REV.04 20150517