P6KE6.8 Datasheet, PDF (1/4 Pages) Daesan Electronics Corp. – POWER 600Watts VOLTAGE 6.8 to 440 Volts

DATA SHEET
SEMICONDUCTOR
GLASS PASSIVATED JUNCTION
TRANSIENT VOLTAGE SUPPRESSOR
600 Watt Peak Power VOLTAGE- 6.8 to 540 Volts
P6KE Series
FEATURES
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
Typical IR less than 1µA above 10V
600W surge capability at 1ms
Excellent clamping capability
Low zener impedance
Fast response time: typically less than 1.0 ps from 0 volts to BV min
Pb free product are available : 99% Sn above can meet RoHS environment substance
directive request
High temperature soldering : 260^OC / 10 seconds at terminals
Pb free product at available : 99% Sn above meet RoHS
environment substance directive request
MECHANICAL DATA
Case: JEDEC DO-15 Molded plastic
Terminals: Axial leads, solderable per MIL-STD-750, Method 2026
Polarity: Color band denoted cathode except Bipolar
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA Suffix for types
Electrical characteristics apply in both directions.
DO-15 Unit:inch(mm)
.140 (3.6)
.104 (2.6)
DIA.
.034 (.86)
.028 (.71)
DIA.
1.0 (25.4)
MIN.
.300 (7.6)
.230 (5.8)
1.0 (25.4)
MIN.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
For Capacitive load derate current by 20%
RATING
SYMBOL
Peak Power Dissipation at TA=25°C, TP=1ms(Note 1)
PPK
Steady State Power Dissipation at TL=75°C
PD
Lead Lengths .375",(9.5mm)(Note 2)
Peak Forward Surge Current, 8.3ms Single Half Sine-Wave
Superimposed on Rated Load(JECED Method) (Note 3)
IFSM
Operating and Storage Temperature Range
TJ, TSTG
NOTES:
1. Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2.
2. Mounted on Copper Leaf area of 1.57 in2 (40mm2).
3. 8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum.
VALUE
600
5.0
100
-55 to +150
UNITS
Watts
Watts
Amps
°C
http://www.yeashin.com
1
REV.02 20120403