MUR260 Datasheet, PDF (1/3 Pages) ON Semiconductor – SWITCHMODE Power Rectifier

DATA SHEET
SEMICONDUCTOR
MUR260
Power Rectifier
Designed for use in switching power supplies, inverters and as
free wheeling diodes, these state–of–the–art devices have the
following features:
Features
Ultrafast 50 Nanosecond Recovery Times
175°C Operating Junction Temperature
Low Forward Voltage
Low Leakage Current
High Temperature Glass Passivated Junction
sivated Junction
These are Pb−Free Devices*
High temperature soldering : 260^OC / 10 seconds at terminals
Pb free product at available : 99% Sn above meet RoHS environment
substance directive request
DO-15
Unit:inch(mm)
.140 (3.6)
.104 (2.6)
DIA.
1.0 (25.4)
MIN.
.300 (7.6)
.230 (5.8)
Mechanical Characteristics
Case: Epoxy, Molded
Weight: 0.4 gram (approximately)
Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
Lead and Mounting Surface Temperature for Soldering Purposes:
220°C Max. for 10 Seconds, 1/16, from case
Shipped in plastic bags, 1000 per bag
Available Tape and Reeled, 5000 per reel, by adding a “RL’’ suffix to
the part number
Polarity: Cathode Indicated by Polarity Band
Marking: MUR260
.034 (.86)
.028 (.71)
DIA.
1.0 (25.4)
MIN.
MAXIMUM RATINGS
Rating
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Symbol
VRRM
VRWM
VR
Value
600
—
Average Rectified Forward Current (Note 1)
(Square Wave Mounting Method #3 Per Note 3)
IF(AV)
2.0 @
TA = 60°C
Non-Repetitive Peak Surge Current
(Surge applied at rated load conditions,
halfwave, single phase, 60 Hz)
IFSM
60
Operating Junction Temperature and Storage
Temperature Range
TJ, Tstg
–55 to
+150
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle 3 2.0%.
Unit
Volts
Amps
Amps
°C
http://www.yeashin.com
1
REV.02 20110725