MUR220 Datasheet, PDF (1/3 Pages) ON Semiconductor – SWITCHMODE Power Rectifier

DATA SHEET
SEMICONDUCTOR
MUR220
Power Rectifier
designed for use in switching power supplies, inverters and as
free wheeling diodes, these state–of–the–art devices have the
following features:
FEATURES
DO-15
Unit:inch(mm)
Ultrafast 50 Nanosecond Recovery Times
175°C Operating Junction Temperature
Low Forward Voltage
Low Leakage Current
High Temperature Glass Passivated Junction
High temperature soldering : 260^OC / 10 seconds at terminals
.140 (3.6)
.104 (2.6)
DIA.
1.0 (25.4)
MIN.
Pb free product at available : 99% Sn above meet RoHS environment
substance directive request
.300 (7.6)
.230 (5.8)
Mechanical Characteristics
Case: Epoxy, Molded
Weight: 0.4 gram (approximately)
Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
Lead and Mounting Surface Temperature for Soldering Purposes:
220°C Max. for 10 Seconds, 1/16, from case
Shipped in plastic bags, 1000 per bag
Available Tape and Reeled, 5000 per reel, by adding a “RL’’ suffix to
the part number
Polarity: Cathode Indicated by Polarity Band
Marking: MUR220
.034 (.86)
.028 (.71)
DIA.
1.0 (25.4)
MIN.
MAXIMUM RATINGS
Rating
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current
(Note 1.) (Square Wave Mounting
Method #3 Per Note 3.)
Non-Repetitive Peak Surge Current
(Surge applied at rated load conditions,
halfwave, single phase, 60 Hz)
Operating Junction Temperature and
Storage Temperature Range
Symbol
VRRM
VRWM
VR
Value
200
—
IF(AV)
2.0 @
TA = 90°C
Unit
Volts
Amps
IFSM
60
Amps
–55 to
TJ, Tstg
°C
+150
1. Pulse Test: Pulse Width = 300 _s, Duty Cycle 3 2.0%.
http://www.yeashin.com
1
REV.02 20110725