MUR120 Datasheet, PDF (1/3 Pages) Motorola, Inc – ULTRAFAST RECTIFIERS 1.0 AMPERE 200-400-600 VOLTS

DATA SHEET
SEMICONDUCTOR
MUR120 ~ MUR160
designed for use in switching power supplies, inverters and as free
wheeling diodes, these state–of–the–art devices have the following features:
FEATURES
• Ultra fast 50 and 75 Nano second Recovery Times
• 175°C Operating Junction Temperature
• Low Forward Voltage
• Low Leakage Cu rrent
• High Temperature Glass Passivated Junction
• Reverse Voltage to 6 00 Volts
• High temperature soldering : 260 ^OC / 10 seconds at terminals
• Pb free product a t available : 9 9% Sn above meet RoHS environment
sub stance directive request
Mechanical Characteristics:
• Case : Epoxy , Molded
• Weight: 0.4 gram (approximately)
• Finish : All External Surfaces Corrosion Resi stant and Terminal Leads are
Readily Solderable
• Lead and Mounting Surface Temperature fo r Soldering Purposes: 2 20°C
Max . for 10 Seconds, 1 /16, from case
• Shipped in plastic bags, 1000 perbag
• Av ailable Tape and Reeled , 5 000 per reel , by adding a “RL’’ su ffix to the part number
• Polarity: Cathode Indicated by Polarity Band
• Marking : MUR120, MUR140 , MUR160
MAXIMUM RATINGS
Rati ng
Symbol
120
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
VRRM
VRWM
200
DC Blocking Voltage
VR
Average Rectified Forward Current
(Square Wave Mounting Method #3 Per Note 1)
IF(AV)
1.0 @ TA = 130°C
Nonrepetitive Peak Surge Current
(Surge applied at rated load conditions, halfwave, IFSM
single phase, 60 Hz)
Operating Junction Temperature and
Storage Temperature
THERMAL CHARACTERISTICS
TJ, Tstg
Maximum Thermal Resistance, Junction to Ambient RqJA
ELECTRICAL CHARACTERISTICS
Maximum Instantaneous Forward Voltage (1)
(iF = 1.0 Amp, TJ = 150°C)
vF
(iF = 1.0 Amp, TJ = 25°C)
0.875
1.00
Maximum Instantaneous Reverse Current (1)
50
(Rated dc Voltage, TJ = 150°C)
iR
5
(Rated dc Voltage, TJ = 25°C)
Maximum Reverse Recovery Time
trr
50
(IF = 0.5 Amp, iR = 1.0 Amp, IREC = 0.25 A)
(1) Pulse Test: Pulse Width = 300 ms, Duty Cycle 3 2.0%.
DO-41 Unit:inch(mm)
.107 (2.7)
.080 (2.0)
DIA.
.034 (.86)
.028 (.71)
DIA.
1.0 (25.4)
MIN.
.205 (5.2)
.160 (4.1)
1.0 (25.4)
MIN.
MUR
140
160
400
600
1.0 @ TA = 120°C
30
-55 to +150
See Note 1
0.875
1.00
150
5
50
1.00
1.30
150
5
50
Uni t
Volts
Amps
Amps
°C
°C/W
Volts
uA
ns
http://www.yeashin.com
1
REV.02 20110725