MBR120S Datasheet, PDF (1/2 Pages) Yea Shin Technology Co., Ltd – SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

DATA SHEET
SEMICONDUCTOR
MBR120S Thru MBR1100S
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
H
VOLTAGE- 20 to 100 Volts CURRENT- 1.0 Amperes
FEATURES
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
For surface mounted applications
Low profile package
Built-in strain relief
Metal to silicon rectifier. majority carrier conduction
Low power loss,high efficiency
High surge capacity
High current capacity ,low VF
For use in low voltage high frequency inverters, free wheeling,
and polarity protection applications.
High temperature soldering guaranteed: 260°C /10 seconds
at terminals
High temperature soldering : 260^OC / 10 seconds at terminals
Pb free product at available : 99% Sn above meet RoHS
environment substance directive request
MECHANICAL DATA
Case: SOD-123S molded plastic
Terminals:Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes positive end (cathode)
SOD-123S Unit:inch(mm)
0.112(2.85)
0.100(2.55)
0.152(3.85)
0.140(3.55)
0.049(1.25)
0.033(0.85)
0.025(0.65)
0.014(0.35)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Resistive or inductive load.
Marking Code
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TL (See figure 1)
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed
on rated load (JEDEC method)
Maximum Instantaneous Forward Voltage at 1.0A
(Note 1)
Maximum DC Reverse Current (Note 1) Ta= 25°C
at Rated DC Blocking Voltage Ta=100°C
SYMBOLS MBR120S MBR130S MBR140S MBR150S MBR160S MBR180S MBR1100S UNITS
T2
T3
T4
T5
T6
T8
TA UNITS
VRRM
20
30
40
50
60
80
100
V
VRMS
14
21
28
35
42
56
71
V
VDC
20
30
40
50
60
80
100
V
I(AV)
1.0
A
IFSM
20.0
A
VF
0.50
IR
0.70
0.5
10.0
0.85
V
mA
Maximum Thermal Resistance(Note 2)
RθJA
98.0
°C/W
Operating Temperature Range
TJ
Storage Temperature Range
TSTG
NOTES:
A.Pulse Test with PW =300µsec, 2% Duty Cycle.
B.Mounted on P.C. Board with 5.0mm2 (.013mm thick) copper pad areas.
http://www.yeashin.com
1
-55 to +150
-55 to +150
°C
°C
REV.04 20150106