KBPC8005 Datasheet, PDF (1/2 Pages) Shanghai Sunrise Electronics – SINGLE PHASE SILICON BRIDGE RECTIFIER

DATA SHEET
SEMICONDUCTOR
KBPC8005 THRU KBPC810
TECHNICAL SPECIFICATIONS
OF SINGLE-PHASE SILICON
BRIDGE RECTIFIER
VOLTAGE RANGE-50 to1000 Volts
CURRENT-8.0 Amperes
FEATURES
Surge overload rating: 125 Amperes peak
Low forward voltage drop
High temperature soldering : 260^OC / 10 seconds at terminals
Pb free product at available : 99% Sn above meet RoHS
environment substance directive request
BR-10 Unit:inch(mm)
30 6
4
0
MECHANICAL DATA
Case: Molded plastic
Epoxy: UL 94V-0 rate flame retardant
Lead: MIL-STD-202, Method 208 guaranteed
Polarity: Symbols molded or marked on body
Mounting position: Any
Weight: 6.9 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
KBPC KBPC KBPC KBPC KBPC KBPC KBPC
SYMBOLS
UNIT
8005 801 802 804 806 808 810
VRRM
50
100 200 400 600 800 1000 Volts
VRMS
35
70
140 280 420 560 700 Volts
Maximum DC Blocking Voltage
VDC
50
100 200 400 600 800 1000
Maximum Average Forward Rectified Output
IO
8.0
Current at TC = 50
Peak Forward Surge Current
8.3ms single half sine - wave superimposed on
IFSM
125
rated load (JEDEC method )
Maximum Forward Voltage Drop per element at 4.0A DC
VF
1.1
Maximum DC Reverse Current at Rate
@TA = 25
5.0
IR
DC Blocking Voltage per element
@TC =100
500
I2t Rating for Fusing(t<8.3ms)
I2t
166
Typical Junction Capacitance (Note1)
CJ
200
Typical Thermal Resistance (Note2)
R JC
21
Operating Temperature Range
TJ
-55 to +150
Storage Temperature Range
TSTG
-55 to +150
NOTES: 1.Measured at 1 MHz and applied reverse voltage of 4.0 volts
2.Thermal Resistance from Junction to Ambient and from junction to lead mounted on P.C.B. with 0.5x0.5”(13x13mm)copper pads.
Volts
Amps
Amps
Volts
Amps
A2Sec
pF
/W
http://www.yeashin.com
1
REV.02 20120305