KBPC25005N Datasheet, PDF (1/2 Pages) Yea Shin Technology Co., Ltd – VOLTAGE RANGE 50 to 1000 Volts CURRENT 25 Ampere

DATA SHEET
SEMICONDUCTOR
KBPC25005N THRU KBPC2510N
VOLTAGE RANGE 50 to 1000 Volts
CURRENT 25 Ampere
FEATURES
Low cost
This series is UL recognized under component
index, file number E127707
High forward surge current capability
Integrally molded heatsink provide
very low thermal resistance.
High isolation voltage from case to lugs.
High temperature soldering guaranteed:
260 /10 second, at 5 lbs. (2.3kg) tension.
High temperature soldering : 260^OC / 10 seconds at terminals
Pb free product at available : 99% Sn above meet RoHS
environment substance directive request
BR35N Unit: inch(mm)
MECHANICAL DATA
Case: Molded plastic body, suffic "N" for thinner type
Terminal: Plated 0.25" (6.35mm) lug.
Polarity: Polarity symbols marked on case.
Mounting: Thru hole for #10 screw, 20 in,- lbs. Torqute Max.
Weight: 0.55 ounce, 15.6gram(KBPC25N)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%
KBPC KBPC KBPC KBPC KBPC KBPC KBPC
SYMBOLS
UNIT
25005N 2501N 2502N 2504N 2506N 2508N 2510N
Maximum Repetitive Peak Reverse Voltage
VRRM
50
100 200 400 600
Maximum RMS Voltage
VRMS
35
70
140 280 420
Maximum DC Blocking Voltage
VDC
50
100 200 400 600
Maximum Average Forward Rectified Output
I(AV)
25
Current, at TC = 50_ (Note 1, 2)
Peak Forward Surge Current
8.3ms single half sine - wave superimposed on
IFSM
300
rated load (JEDEC method )
Rating for Fusing (t<8.3ms)
I2t
373
Maximum Instantaneous Forward Voltage Drop
VF
1.1
per bridge element at 12.5A
Maximum DC Reverse Current at rate
TA = 25
10
IR
DC blocking voltage per element
TA =100
1.0
Isolation Voltage from case to lugs
VISO
2500
Typical Thermal Resistance (Note 1,2)
R JC
2.0
Operating Temperature Range
TJ
(-65 to +150)
Storage Temperature Range
TSTG
(-65 to +150)
1. Unit mounted on 5" X 6" X 4.9" (12.8cm X 15.2cm X 12.4cm)Al. finned Plate.
2. Bolt down on heat-sink with silicon thermal compound between bridge and mounting sutfae for maximum heat
transfer efficiency with # 10 screw.
800 1000 Volts
560 700 Volts
800 1000 Volts
Amps
Amps
A2s
Volts
A
mA
VAC
/W
http://www.yeashin.com
1
REV.02 20120305