KBP005M Datasheet, PDF (1/2 Pages) Won-Top Electronics – 1.5A GLASS PASSIVATED BRIDGE RECTIFIER

DATA SHEET
SEMICONDUCTOR
KBP005M THRU KBP10M
GLASS PASSIVATED SINGLE-PHASE RECTIFIER BRIDGE
Reverse Voltage - 50 to 1000 Volts Forward Current - 1.5 Amperes
FEATURES
Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
This series is UL listed under Recognized Component Index,
file number E54214
Glass passivated chip junctions
High surge current capability
Ideal for printed circuit board
High temperature soldering guaranteed:
260°C/10 seconds at 5 lbs. (2.3kg) tension
High temperature soldering : 260^OC / 10 seconds at terminals
Pb free product at available : 99% Sn above meet RoHS
environment substance directive request
MECHANICAL DATA
Case: Molded plastic body over passivated junctions
Terminals: Plated lead solderable per MIL-STD-750,
Method 2026
Polarity: Polarity symbols marked on case
Mounting position: Any
Weight: 0.06 ounce, 1.7 grams
KBPM Unit:inch(mm)
0.125 x 45^o
(3.2)
0.600 (15.24)
0.560 (14.22)
0.460 (11.68) _{0.500 (12.70)}
0.420 (10.67) _{0.460 (11.68)}
60
(15.2)
MIN.
0.034 (0.86)
0.028 (0.76)
DIA.
0.1693 (4.3)
0.1456 (3.7)
0.060
(1.52)
0.160 (4.1)
0.140 (3.6)
0.50
(12.7)
MIN.
0.075 (1.91)
0.051 (1.29)
Polarity shown on front side of case: positive lead by beveled corner
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
KBP
SYMBOLS
005M
KBP
01M
KBP
02M
KBP
04M
KBP
06M
KBP
08M
KBP
UNITS
10M
Maximum repetitive peak reverse voltage
VRRM
50
100 200 400 600 800 1000 Volts
Maximum RMS voltage
VRMS
35
70
140 280 420 560 700 Volts
Maximum DC blocking voltage
VDC
50
100 200 400 600 800 1000 Volts
Maximum average forward output rectified current at
I(AV)
TA=55°C
1.5
Amps
Peak forward surge current single half sine-wave
superimposed on rated load (JEDEC Method) TJ=150°C
IFSM
50.0
Amps
30.0
Rating for fusing (t < 8.3ms)
I2t
10.0
A2sec
Maximum instantaneous forward voltage drop at 1.0A per leg VF
1.0
Volts
Maximum DC reverse current TA=25°C
IR
at rated DC blocking voltage per leg TA=125°C
5.0
uA
500
Typical junction capacitance per leg (NOTE 1)
CJ
15.0
pF
R JA
40.0
Typical thermal resistance per leg (NOTE 2)
/W
R JL
13.0
Operating junction and storage temperature range
Tj, TSTG
-55 to +150
NOTES:
(1) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts
(2) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with, 0.47 x 0.47" (12 x12mm) copper pads
* JEDEC registered values
http://www.yeashin.com
1
REV.02 20120305