GBU4A Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER(VOLTAGE 50 to 800 Volts CURRENT - 4.0 Amperes)

DATA SHEET
SEMICONDUCTOR
GBU4A THRU GBU4M
GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
Reverse Voltage - 50 to 1000 Volts Forward Current - 4.0 Amperes
FEATURES
Plastic package has Underwriters Laboratory Flammability
Classification 94V-0
This series is UL listed under the Recognized Component
Index, file number E314039
High case dielectric
strength of 1500 VRMS
Ideal for printed circuit boards
Glass passivated chip junction
High surge current capability
High temperature soldering guaranteed:
260°C/10 seconds, 0.375 (9.5mm) lead length,
5lbs. (2.3kg) tension
High temperature soldering : 260^OC / 10 seconds at terminals
Pb free product at available : 99% Sn above meet RoHS
environment substance directive request
MECHANICAL DATA
Case: Molded plastic body over passivated junctions
Terminals: Plated leads solderable per MIL-STD-750,
Method 2026
Mounting Position: Any (NOTE 4)
Mounting Torque: 5 in. - lb. max.
Weight: 0.15 ounce, 4.0 grams
GBU Unit:inch(mm)
0.020 R (TYP.)
0.310 (7.9)
0.290 (7.4)
0.085 (2.16)
0.065 (1.65)
0.100 (2.54)
0.085 (2.16)
0.880 (22.3)
0.860 (21.8)
0.160 (4.1)
0.140 (3.5)
0.075
(1.9) R.
0.125 (3.2) x 45^o
CHAMFER
0.740 (18.8)
0.720 (18.3)
0.080 (2.03)
0.060 (1.52)
0.050 (1.27)
0.040 (1.02)
0.710 (18.0)
0.690 (17.5)
0.140 (3.56)
0.130 (3.30)
9^o
TYP.
5^o
TYP.
0.085 (2.16)
0.075 (1.90)
0.080 (2.03)
0.065 (1.65)
0.190 (4.83)
0.210 (5.33)
Dimensions in inches and (millimeters)
0.022 (0.56)
0.018 (0.46)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum average forward rectified TC=100°C (NOTE 1)
output current at TA=40°C (NOTE 2)
GBU
SYMBOLS
4A
VRRM 50
VRMS 35
VDC
50
GBU
4B
100
70
100
GBU
4D
200
140
200
GBU
4G
400
280
400
GBU
4J
600
420
600
GBU
4K
800
560
800
GBU
4M
1000
700
1000
UNITS
Volts
Volts
Volts
I(AV)
4.0
Amps
3.0
Peak forward surge current single sine-wave
IFSM
150
superimposed on rated load (JEDEC Method)TJ=150°C
Rating for fusing (t<8.3ms)
I2t
93.0
Maximum instantaneous forward voltage drop
VF
1.0
per leg at 4.0A
Maximum DC reverse current at TA=25°C
5.0
rated DC blocking voltage per leg TA=125°C
IR
500
Typical junction capacitance per leg (NOTE 3)
Cj
100.0
45
Typical thermal resistance per leg (NOTE 2)
RQJA
22.0
(NOTE 1)
RQJC
4.2
Operating junction and storage temperature range
TJ, TSTG
-55 to +150
NOTES:
(1) Unit case mounted on 1.6 x 1.6 x 0.06” thick (4.0 x4.0 x 0.15cm) Al. Plate
(2) Units mounted on P.C.B. with 0.5 x 0.5" (12 x 12mm) copper pads and 0.375" (9.5mm) lead length
(3) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(4) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw
Amps
A2sec
Volts
uA
pF
/W
http://www.yeashin.com
1
REV.02 20120305