FR3AB Datasheet, PDF (1/2 Pages) Micro Commercial Components – 3 Amp Fast Recovery Silicon Rectifier 50 to 1000 Volts

DATA SHEET
SEMICONDUCTOR
FR3AB THRU FR3MB
FAST SWITCHING SURFACE MOUNT RECTIFIER
VOLTAGE- 50 to 1000 Volts CURRENT - 3.0 Amperes
FEATURES
• For surface mounted applications
• Low profile package
• Built-in strain relief
• Easy pick and pl ace
• Fast Recovery times for high ef ficiency
• Plastic package has Underwriters Laboratory Flammability
Classification 94V-O
• Glass passivated junction
• High temperature soldering : 260 °C /10 seconds at terminals
• Pb free product a t available : 99% Sn above meet RoHS environment
substance directiv e request.
SMB/DO-214AA
Unit:inch(mm)
.083(21. 1 )
.075(1.91)
.155 (39. 4 )
.130(33. 0 )
.185(4.70)
.160(40. 6 )
.012( .305)
.006( .152)
MECHANICAL DATA
• Case: JEDEC DO-214AA molded pl astic
• Terminals: Solder plated, solderable per MIL-STD-750 ,
• Method 2026
• Polarity : Indicated by cathode band
• Standard packaging: 12mm tape (EIA-481)
.096 (24. 4 )
.083 (2.13)
.050(12. 7 )
.030(07. 6 )
.008(.203)
.002(0. 51 )
.220 (55. 9 )
.200(50. 8 )
.012(.31)
.006(.15)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse V oltage
SYMBOLS FR3AB FR3BB FR3DB FR3GB FR3JB FR3KB FR3MB Unit
VRRM
50
100
200
400
600
800 1000
V
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
V
Maxi mum DC Blocki ng Voltage
VDC
50
Maximum Average Forward ,Rectif ied Current
at TL=90°C
Peak Forward Surge Current 8.3ms single half sine wave
superimposed on rated load (J EDEC method)
Maximum Instantaneous Forw ard Vol tage at 3.0A
Maxi mum DC Reverse Cur rent T A=25°C
at Rated DC Blocking Vol tage TA=125°C
I(AV)
I FSM
VF
IR
Maximum Reverse Recovery Time(Note 1) T J=25°C
TRR
Typical Juncti on Capacitance (Note 2)
CJ
Maximum Thermal Resistance(Note 3)
Operati ng and Storage Temperature Range
RÓ¨JL
TJ,TSTG
NOTES : 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A
2. Measured at 1 MHz and applied Vr = 4.0 volts.
3. 8.0 mm2 ( .013mm thick ) land areas.
100
200
400
600
800 1000
V
3.0
A
100
1.3
10.0
300
150
250
60.0
15.0
-55 to +150
A
V
µA
500
ns
pF
°C / w
°C
http://www.yeashin.com
1
REV.02 20150105