FG1201CT Datasheet, PDF (1/3 Pages) Yea Shin Technology Co., Ltd – FAST RECOVERY

DATA SHEET
SEMICONDUCTOR
FG1201CT~FG1207CT
FAST RECOVERY
GLASS PASSIVATED RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 12.0 Amperes
FEATURES
• Fast sw itching
• Low leakage
• Low forward voltage drop
• High current capability
• High surge capability
• High reliability
• High temperature soldering : 260°C / 10 seconds at terminals
• Pb free product at available : 99% Sn above meet RoHS environment
substance directive request
MECHANICAL DATA
• Case : TO-220AB molded plastic
• Epoxy : Device has UL flammability classi ficati on 94 V-O
• Lead: MIL-STD-202E method 208C guaranteed
• Mounting position: Any
• W eight: 2.24 grams
• Polarity: As marking
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TO-220AB Unit:inch(mm)
MAXIMUM RATINGS (At TA = 25°C unless otherwise noted)
RATINGS
SYMBOL FG1201CT FG1202CT FG1203CT FG1204CT FG1205CT FG1206CT FG1207CT UNITS
Maximum Recurrent Peak Reverse V oltage
VRRM
50
100
200
400
600
800
1000 Volts
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700 Volts
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
1000 Volts
Maximum Average Forward Rect if ied Current at TC = 75°C I O
12.0
Amps
Peak Forward Surge Current 8.3 ms single half sine- wave
superimposed on rated load (J EDEC method)
I FSM
125
Amps
Typical Thermal Resistance (Note 3 )
RθJC
3
°C / W
Typi cal Junction Capaci tance (Note 2)
CJ
50
pF
Operati ng and Storage Temperature Range
TJ, TSTG
-55 to +150
°C
ELECTRICAL CHARACTERISTICS (At TA = 25°C unless otherwise noted)
CHARACTERISTICS
SYMBOL FG1201CT FG1202CT FG1203CT FG1204CT FG1205CT FG1206CT FG1207CT UNITS
Maximum Instantaneous Forw ard Vol tage at 6.0A DC
VF
1.3
Volts
Maxi mum DC Reverse Cur rent
at Rated DC B lock ing Vol tage TA = 25°C
IR
Maximum Ful l Load Reverse Current Average,
Full Cycle at TC = 100 °C
10
uAmps
150
uAmps
Maximum Reverse Recovery Time (Note 1)
trr
150
250
500
nSec
NOTES : 1. Test Conditions: IF = 0.5A, IR = -1.0A, IRR = -0.25A
2. Measured at 1 MHz and applied reverse voltage of 4.0 volts
3. Thermal Resistance Junction to Case.
4. Suffix “R” for Reverse Polarity.
http://www.yeashin.com
1
REV.02 20150105