FG1001FCT Datasheet, PDF (1/3 Pages) Yea Shin Technology Co., Ltd – FAST RECOVERY

DATA SHEET
SEMICONDUCTOR
FG1001FCT~FG1007FCT
FAST RECOVERY
GLASS PASSIVATED RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 10.0 Amperes
FEATURES
• Fast sw itching
• Low leakage
• Low forward voltage drop
• High current capability
• High surge capability
• High reliability
• High temperature soldering : 260 ^O C / 10 seconds at terminals
• Pb free product a t available : 99% Sn above meet RoHS environment
substance directive request.
MECHANICAL DATA
• Ca se: ITO-220AB molded plastic
• Epoxy : Device has UL flammability cla ssi fication 94 V-O
• Lead: MIL-STD-202E method 208C guaranteed
• Mounting position: A ny
• Weight: 2.24 grams
• Polarity: As m arking
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
ITO-220AB Unit:inch(mm)
MAXIMUM RATINGS (At TA = 25°C unless otherwise noted)
RATINGS
SYMBOL FG1001FCT FG1002FCT FG1003FCT FG1004FCT FG1005FCT FG1006FCT FG1007FCT UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000 Volts
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700 Volts
Maximum DC Blocking Voltag e
VDC
50
100
200
400
600
800
1000 Volts
Maximum Average Forward Rectified Current at T C = 75°C I O
10.0
Amps
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
I FSM
125
Amps
Typical Thermal Resistance ( Note 3)
RθJC
3
°C/ W
Typical Junction Capacitance (Note 2)
CJ
50
pF
Operating and Storage Temperature Range
TJ, T STG
-55 to +150
°C
ELECTRICAL CHARACTERISTICS (At TA = 25°C unless otherwise noted)
CHARACTERISTICS
SYMBOL FG1001FCT FG1002FCT FG1003FCT FG1004FCT FG1005FCT FG1006FCT FG1007FCT UNITS
Maximum Instantaneous Forward Voltage at 5.0 A DC
VF
1.3
Volts
Maximum DC Reverse Curren
at Rated DC Blocking Voltag e TA = 25 °C
IR
Maximum Full Load Reverse Current Average,
Full Cycle at TC = 100°C
10
uAmps
150
uAmps
Maximum Reverse Recover y Time ( Note 1)
trr
150
250
500
nSec
NOTES : 1. Test Conditions: IF = 0.5A, IR = -1.0A, IRR = -0.25A
2. Measured at 1 MHz and applied reverse voltage of 4.0 volts
3. Thermal Resistance Junction to Case.
4. Suffix “R” for Reverse Polarity.
http://www.yeashin.com
1
REV.02 20150105