FG1001CT Datasheet, PDF (1/3 Pages) Yea Shin Technology Co., Ltd – FAST RECOVERY

DATA SHEET
SEMICONDUCTOR
FG1001CT~FG1007CT
FAST RECOVERY
GLASS PASSIVATED RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 10.0 Amperes
FEATURES
• Fast sw itching
• Low leakage
• Low forward voltage drop
• High current capability
• High surge capability
• High reliability
• High temperature soldering : 260 ^O C / 10 seconds at terminals
• Pb free product a t available : 99% Sn above meet RoHS environment
substance directive request.
MECHANICAL DATA
• Ca se: TO-220AB molded plastic
• Epoxy : Device has UL flammability cla ssi fication 94 V-O
• Lead: MIL-STD-202E me thod 208C guaranteed
• Mounting position: A ny
• Weight: 2.24 grams
• Polarity: As m arking
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
TO-220 AB Unit:inch(mm)
MAXIMUM RATINGS (At TA = 25°C unless otherwise noted)
RATINGS
SYMBOL FG1001CT FG1002CT FG1003CT FG1004CT FG1005CT FG1006CT FG1007CT UNITS
Maximum Recurrent Peak Reverse V oltage
V RRM
50
100
200
400
600
800
1000 Volts
Maximum RMS Voltage
V RMS
35
70
140
280
420
560
700 Volts
Maximum DC Blocking Voltage
V DC
50
100
200
400
600
800
1000 Volts
Maximum Average Forward Rect ified Current at TC = 75°C
IO
10.0
Amps
Peak Forward Surge Current 8.3 ms single half sine- wave
superimposed on rated load (J EDEC method)
I FSM
125
Amps
Typical Thermal Resistance (Note 3 )
R θJ C
3
°C/ W
Typi cal Junction Capacitance (Note 2)
CJ
50
pF
Operati ng and Storage Temperature Range
TJ, T STG
-55 to +150
°C
ELECTRICAL CHARACTERISTICS (At TA = 25°C unless otherwise noted)
CHARACTERISTICS
SYMBOL FG1001CT FG1002CT FG1003CT FG1004CT FG1005CT FG1006CT FG1007CT UNITS
Maximum Instantaneous Forw ard Vol tage at 5.0A DC
VF
1.3
Volts
Maxi mum DC Reverse Cur ren
at Rated DC Blocking Voltage TA = 25°C
IR
Maximum Ful l Load Reverse Current Average,
Full Cycle at TC = 100 °C
10
uAmps
150
uAmps
Maximum Reverse Recovery Time (Note 1)
trr
150
250
500
nSec
NOTES : 1. Test Conditions: IF = 0.5A, IR = -1.0A, IRR = -0.25A
2. Measured at 1 MHz and applied reverse voltage of 4.0 volts
3. Thermal Resistance Junction to Case.
4. Suffix “R” for Reverse Polarity.
http://www.yeashin.com
1
REV.02 20150105