ER3A Datasheet, PDF (1/3 Pages) Pan Jit International Inc. – SURFACE MOUNT RECTIFIER(VOLTAGE- 50 to 600 Volts CURRENT - 3.0 Amperes)

DATA SHEET
SEMICONDUCTOR
SURFACE MOUNT SUPERFAST RECTIFIER
VOLTAGE - 50 to 600 Volts CURRENT - 3.0 Ampere
ER3A Thru ER3J
FEATURES
For surface mounted applications
SMB/DO-214AA Unit:inch(mm)
High temperature metallurgically bonded-no compression
contacts as found in other diode-constructed rectifiers
Glass passivated junction
Built-in strain relief
.083(2.11)
.075(1.91)
.155(3.94)
.130(3.30)
Easy pick and place
Plastic package has Underwriters Laboratory Flammability
Classification 94V-O
Complete device submersible temperature of 260°C for 10
seconds in solder bath
High temperature soldering : 260^OC / 10 seconds at terminals
Pb free product at available : 99% Sn above meet RoHS
environment substance directive request
MECHANICAL DATA
Case: JEDEC DO-214AA molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,
.096(2.44)
.083(2.13)
.050(1.27)
.030(0.76)
.185(4.70)
.160(4.06)
.012(.305)
.006(.152)
.008(.203)
.002(.051)
.220(5.59)
.200(5.08)
.012(.31)
.006(.15)
Method 2026
Polarity: Indicated by cathode band
Standard packaging: 12mm tape (EIA-481)
Weight: 0.003 ounce, 0.093 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
ER3A
Maximum Recurrent Peak Reverse Voltage
50
Maximum RMS Voltage
35
Maximum DC Blocking Voltage
50
Maximum Average Forward Rectified Current,
at TL=75
Peak Forward Surge Current 8.3ms single half sinewave
superimposed on rated load(JEDEC method)
Maximum Instantaneous Forward Voltage at 3.0A
Maximum DC Reverse Current TA=25
At Rated DC Blocking Voltage TA=100
Maximum Reverse Recovery Time (Note 1)
Typical Junction capacitance (Note 2)
Typical Thermal Resistance (Note 3) RθJA
Operating and Storage Temperature Range TJ
NOTES:
1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A
2. Measured at 1 MHz and applied Vr = 4.0 volts.
3. 8.0 mm2 ( .013mm thick ) land areas.
ER3B
100
70
100
ER3C
150
105
150
ER3D
200
140
200
3.0
ER3E
300
210
300
ER3G
400
280
400
100.0
0.95
1.25
5.0
200
35.0
45.0
16
-55 to +150
ER3J
600
420
600
UNITS
V
V
V
A
A
1.70
V
µA
µA
nS
pF
/W
http://www.yeashin.com
1
REV.02 20121119