ER1A Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – SURFACE MOUNT SUPERFAST RECTIFIER(VOLTAGE - 50 to 600 Volts CURRENT - 1.0 Ampere)

DATA SHEET
SEMICONDUCTOR
ER1A~ER1J
SURFACE MOUNT SUPERFAST RECTIFI ER
VOLTAGE - 50 to 600 Volts CURRENT - 1.0 Ampere
FEATURES
• For surface mounted applications
• Low profile package
• Built-in strainrelief
• Easy pick and place
• Superfast recovery times for high efficiency
• Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
SMB/DO-214AA Unit:inch(mm)
.083(2.11)
.075(1.91)
.155(3.94)
.130(3.30)
• Glass passivated junction
• High temperature soldering:
260°C J /10 seconds at terminals
• High temperature soldering : 260°C / 10 seconds at terminals
• Pb free product at available : 99% Sn above meet RoHS
environment substance directive request
MECHANICAL DATA
• Case: JEDEC DO-214AA molded plastic
• Terminals: Solder plated, solderable per
• MIL-STD-750, Method 2026
• Polarity: Indicated by cathode band
• Standard packaging: 12mm tape (EIA-481)
• Weight: 0.003 ounce, 0.093 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
.096(2.44)
.083(2.13)
.050(1.27)
.030(0.76)
.185(4.70)
.160(4.06)
.012(.305)
.006(.152)
.008(.203)
.002(.051)
.220(5.59)
.200(5.08)
.012(.31)
.006(.15)
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOLS ER1A
Maximum Recurrent Peak Reverse V oltage
VRRM
50
Maximum RMS Voltage
VRMS
35
Maximum DC Blocking Voltage
VDC
50
Maximum Average Forward Rectif ied Current ,
at TL=100 ^OC
I(AV)
Peak Forward Surge Current 8.3ms single half
sine wave
IFSM
super imposed on rated load(JEDEC method)
Maximum Instantaneous Forward Vol tage at 1.0A
VF
Maxi mum DC Reverse Cur rent T A=25
IR
At Rated DC Blocking Voltage TA=100
Maximum Reverse Recovery Time (Note 1)
TRR
Typi cal Junction capacitance (Note 2)
CJ
Typical Thermal Resistance (Note 3 )
RθJA
Operating and Storage Temperature Range
TJ,TSTG
NOTES:
1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A
2. Measured at 1 MHz andApplied reversevoltage of 4.0 volts
3. 8.0mm2(.013mm thick) land areas
ER1B
100
70
100
ER1C
150
105
150
ER1D
200
140
200
1.0
ER1E
300
210
300
ER1G
400
280
400
30.0
0.95
1.25
5.0
100
35.0
10.0
34
-55to +150
ER1J
600
420
600
UNITS
Volts
Volts
Volts
Amps
Amps
1.7 Volts
uA
nS
pF
°C /W
°C
http://www.yeashin.com
1
REV.02 20110725