English
Language : 

E2A Datasheet, PDF (1/2 Pages) Yea Shin Technology Co., Ltd – SURFACE MOUNT SUPERFAST RECTIFIER VOLTAGE - 50 to 600 Volts CURRENT - 2.0 Ampere
DATA SHEET
SEMICONDUCTOR
SURFACE MOUNT SUPERFAST RECTIFIER
VOLTAGE - 50 to 600 Volts CURRENT - 2.0 Ampere
FEATURES
For surface mounted applications
Low profile package
Built-in strain relief
Easy pick and place
Superfast recovery times for high efficiency
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
Glass passivated junction
High temperature soldering:
260 OC / 10 seconds at terminals
High temperature soldering : 260OC / 10 seconds at terminals
Pb free product at available : 99% Sn above meet RoHS
environment substance directive request
Detail Z
enlarged
E2A THRU E2J
SMF Unit: inch ( mm )
0.195 (0.9)typical
(0.189)4.8
(0.173)4.4
5
0.22
0.15
(0.052)1.3
(0.043)1.1
5
Z
Cathode Band
Top View
MECHANICAL DATA
Case: JEDEC DO-214AC molded plastic
Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity: Indicated by cathode band
Standard packaging: 12mm tape (EIA-481)
Weight: 0.002 ounce, 0.064 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 OC ambient temperature unless otherwise specified.
Single phase, half wave 60Hz resistive or inductive load.
For capacitive load, derate current by 20%.
0.110(2.8)
1.43
0.095(2.4)
1.38
0.10 max
3.6
3.2
SYMBOLS E2A
Maximum Recurrent Peak Reverse Voltage
VRRM
50
Maximum RMS Voltage
VRMS
35
Maximum DC Blocking Voltage
VDC
50
Maximum Average Forward Rectified Current,
Volts
at TL=120
Peak Forward Surge Current 8.3ms single half
sinewave superimposed on rated load(JEDEC method)
IFSM
Maximum Instantaneous Forward Voltage at 1.0A
VF
Maximum DC Reverse Current TA=25 OC
At Rated DC Blocking Voltage TA=100OC
IR
Maximum Reverse Recovery Time (Note 1)
TRR
Typical Junction capacitance (Note 2)
Cj
Typical Thermal Resistance (Note 3)
RθJA
Operating and Storage Temperature Range
TSTG
NOTES:
1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A
2. Measured at 1 MHz and Applied reverse voltage of 4.0 volts
3. 8.0mm2 (.013mm thick) land areas
E2B E2C E2D E2E E2G
100
150
200
300
400
70
105
140
210
280
100
150
200
300
400
2.0
30.0
0.95
1.25
5.0
100
35.0
10.0
35
-55to +150
E2J UNITS
600 Volts
420 Volts
600 Volts
Amps
Amps
1.7 Volts
uA
nS
pF
OC /W
OC
http://www.yeashin.com
1
REV.02 20110725