IC149-080-31 Datasheet, PDF (9/12 Pages) Yamaichi Electronics Co., Ltd. – QFP/TQFP - 80 Pins (20x20) 0.5mm pitch

CLICK HERE TO GO BACK TO PART NUMBER OVERVIEW
IC149 / ICP Series Emulation-Adapter (80 pins)
Specifications
Insulation Resistance: 500MΩ at 150V DC
Withstanding Voltage: 700V AC for 1 minute
Contact Resistance:
30mΩ max. at 10mA and 20mV
Operating Temp. Range: -25°C to +85°C
Reflow-soldering Temp.: 220°C for 60 seconds
Mating Cycles:
20 insertions maximum
Allowable Torque (max.): - for 1-time screw connection = max 0.147 Nm
- for repetitive screw connection = min 0.078 Nm
max 0.098 Nm
Adapter Part Number
ICP-080-5
Compatible Socket (Part No.)
IC149-80-021-B5 (w/o pos. pins)
IC149-80-121-B5 (with pos. pins)
Materials and Finish
Housing: PTES, glass filled UL94V-0
Contact: Phosphor Bronze
Plating: Au 0.3µm min. over 2.5 ~ 4.5µm Ni
Outline Adapter Dimensions (Reference Only)
36.62
2.4
6.20
Remarks
1. Ensure a clean contact area. Fluxes, dust and other impurifications
may cause corrosion and contact problems.
2. Careful attention must be taken when fixing the Adapter,
since it is made from thermoplastic material.
By exceeding the maximum torque a perfect performance can
no longer be guaranteed.
21.90
32.42
Adapter PCB-Layout (IC149-80-*21-B5)
N5
Top View from Soldering Side
Note: No conduits within this hatched area.
SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER