NDP050-003-BF Datasheet, PDF (1/1 Pages) Yamaichi Electronics Co., Ltd. – 90° SMT Type Plug (1.27mm Pitch)

Series NDP
90° SMT Type Plug (1.27mm Pitch)
Internal
Connectors
Specifications
Insulation Resistance: 500MΩ min. at 500V DC
Withstanding Voltage: 500V ACrms for 1 minute
Contact Resistance:
35mΩ max. at 10mA
Current Rating:
0.5A
Operating Temp. Range: –55°C to +85°C
Mating Cycles:
500 insertions
Soldering Temp.:
220°C min. / 60 sec., 250°C peak
Materials and Finish
Housing: PPS (glass filled), UL 94V-0 rated
Contacts: Copper Alloy
Plating: Mating Face Contacts - Au over Ni
Solder Terminals - Au over Ni
Part Number (Details)
NDP
050 - 003 - BF
Series (plug)
No. of Leads
Terminal Type:
3 = Right Angle SMT
Contact Plating:
Mating Face - Au (0.3µm min.) over Ni
Solder Terminals - Au (0.05µm min.) over Ni
Features
 Low insertion and extraction forces due to bellows type contacts
Outline Dimensions
Recommended PCB Layout
Top View
Contact Details
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
Connectors D-65