NDP050-002-BF Datasheet, PDF (1/2 Pages) Yamaichi Electronics Co., Ltd. – 90° 180° Solder Dip Plug (1.27mm Pitch)

Series NDP
90° Solder Dip Plug (1.27mm Pitch)
Specifications
Insulation Resistance: 500MΩ min. at 500V DC
Withstanding Voltage: 500V ACrms for 1 minute
Contact Resistance:
35mΩ max. at 10mA
Current Rating:
0.5A
Operating Temp. Range: –55°C to +85°C
Mating Cycles:
500 insertions
Soldering Temp.:
260°C / 3 sec.
Materials and Finish
Housing: PPS (glass filled), UL 94V-0 rated
Contacts: Copper Alloy
Plating: Mating Face Contacts - Au over Ni
Solder Terminals - Au over Ni
Features
 Low insertion and extraction forces due to bellows type contacts
Outline Dimensions
Internal
Connectors
Part Number (Details)
NDP
050 - 002
Series (plug)
- BF
No. of Leads
Terminal Type:
2 = Right Angle Solder Dip
Contact Plating:
Mating Face - Au (0.3µm min.) over Ni
Solder Terminals - Au (0.05µm min.) over Ni
Contact Details
Recommended PCB Layout
For 14, 26, 30 and 50 Leads only
For All Other Leads
Top View
Standard types
Part Number No. of Leads A
NDP036-002-BF
36
28.75
NDP068-002-BF
68
49.07
NDP128-002-BF
128
87.17
B
26.55
46.87
84.97
C
21.59
41.91
80.01
D
E
33.43
53.75
91.85
38.93
59.25
97.35
For the following versions below please contact Yamaichi,
minimum order quantity may be required
NDP040-002-BF
NDP100-002-BF
40
31.29 29.09 24.13 35.97 41.47
100
69.39 67.19 62.23 74.04 79.57
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
Connectors D-63