IC299-01677 Datasheet, PDF (1/2 Pages) Yamaichi Electronics Co., Ltd. – HF Socket / Handler (Y Shaped SMT Contacts)

IC299 Series (Test Contactor) HF Socket / Handler (Y Shaped SMT Contacts)
Specifications
Insulation Resistance:
1,000MW min. at 500V DC
Dielectric Withstanding Voltage: 500V AC for 1 minute
Contact Resistance:
30mW max. at 10m /20mV max.
Operating Temperature Range: –20°C to +125°C
Contact Force:
10g to 100g per pin within contact travel
Contact Inductance:
Mating Cycles:
distance from 0.2 to 0.5mm
2nH max.
10,000 insertions min.
Materials and Finish
Housing: PES / PEI (glass-filled)
Contacts: Beryllium Copper (BeCu)
Plating: Gold over Nickel
Part Number (Details)
IC299 - 016 77 (.AC*****)
Series No.
No. of Contact Pins
Design Number
Custom Design Number
Series Description
The IC299 Test Contactor Series is ideal for automated and manual testing of SOP, SSOP, TSOP
and QFP packages in any conceivable pitch size.
For your specific device testing application, every IC299 Test Contactor can be designed and
manufactured with or without a cover, or as a Clamshell Socket (see outline dimensions).
The IC299 Series is for the testing of high frequency SOP and QFP devices up to 10GHz.
The IC299 contactors pick up gullwing shaped leads on specially designed Y-shaped contacts,
which allow an inductance of less than 2nH.
Contact Details
Contact position
PCB and Pad Layout
Top View from Socket
IC
PCB
Ordering Procedure
Note: Each Test Contactor Socket is custom built.
The customer must specify the number of contact pins, required pitch, all device parameters
and any other special requirements.
The final part number will be determined by Yamaichi.
Available Package Types :
SOP, SSOP, TSOP and QFP
Pin Count:
Any pin count from 8 to 304 pins is possible
Available Pitch Sizes:
0.50, 0.65, 0.80 and 1.27mm
E-8 Test & Burn-In
SPECIFICATIONS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE – DIMENSIONS IN MILLIMETER