CNS-STP-AR10-A-1 Datasheet, PDF (1/2 Pages) Yamaichi Electronics Co., Ltd. – PCMCIA II Slot - Single Deck (SMT Type)

Card
Connectors
Series CNS
PCMCIA II Slot - Single Deck (SMT Type)
Specifications
Insulation Resistance:
Withstanding Voltage:
Contact Resistance:
Current Rating:
Soldering Temp.:

1,000MΩ min.
500V ACrms for 1 minute
40mΩ max.
0.5A per contact
Rear socket: 220°C /40 sec.,
240°C peak
Materials and Finish
Insulator:
PBT, glass filled (UL94V-0)
Contact:
Phosphor Bronze
Plating:-
Header:

Card side - Au 0.3µm over Ni 2.0µm

Rear side - Au flash over Ni 2.0µm

Rear Socket:

Mating side - Au 0.2µm over Ni 1.0µm

Solder side - Au flash over Ni 1.0µm
Plate:
Stainless Steel
Side Contact: Phosphor Bronze
Plating:
Au over Ni
Features
 SMT connector makes assembly and rework easier
 Small, light and low profile connector meets
all kinds of PC card system requirements
 Various product combinations single
or double deck, right or left eject lever,
polarization styles, various stand-off heights,
fully supports the customer’s design needs
 Convenience of PC card removal with
push type eject lever
Part Number (Details)
CNS
Series
- S T P -A R -8 3 -A- 1
S = Single Deck
PCB Mounting Style:
T = Top B = Bottom
Voltage Style:
P = 3.3V / 5V Card
A = Plastic Lever
B = Metal Lever
C = Foldable Lever
D = 2 Step Lever
E = Without Ejector
Eject Lever:
R = Right
L = Left
*Height of Stand-off:
1 = 0mm 4 = 2.2mm 8 = 5.0mm
Nut Insert:



0 = None (on request)
1 = Header (on request)
2 = Guide (on request)
3 = Header / Guide (standard)
Shield Plate:



A = None
B = Top
C = Bottom
D = Top / Bottom
Kapton Film:



no mark = None
1 = Top
2 = Bottom
3 = Top and Bottom
*Stand-off products 0.0 and 2.2mm are subject to a
minimum order quantity of 1,120 pcs.
Part Number (Details) for Rear Socket
PCMCIA - 1260
Packing Number
-*
Available Types
0 = Without Kapton Film (Tray)
1 = With Kapton Film (Tray)
9 = With Kapton Film
(Tape & Reel,1,500 pcs. per reel)
A-46 Connectors
SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER
Trading Division